ARDUINO UNO WiFi REV2
The Arduino for your educational projects with wireless connectivity and motion sensing.
| Manufacturer | Arduino |
|---|---|
| Description | ARDUINO UNO WiFi REV2 |
| Part Number | ABX00021 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 6 - 20V |
| Digital I/O Pins | 14 — 5 Provide PWM Output |
| Analog Input Pins | 6 |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 48 KB (ATmega4809) |
| SRAM | 6,144 Bytes (ATmega4809) |
|---|---|
| Clock Speed | 16 MHz |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 25 g |
| Microcontroller | ATmega4809 (datasheet) |
| DC Current per I/O Pin | 20 mA |
| EEPROM | 256 Bytes (ATmega4809) |
| LED_BUILTIN | 25 |
产品选择
| Part Number | Description | Operating Voltage | Input Voltage (recommended) | Digital I/O Pins | Analog Input Pins | DC Current for 3.3V Pin | Flash Memory | SRAM | Clock Speed | Length | Width | Weight | Microcontroller | PWM Digital I/O Pins | DC Current per I/O Pin | EEPROM | LED_BUILTIN | Radio module | Secure Element | Inertial Measurement Unit | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ABX00021 | ARDUINO UNO WiFi REV2 | 5V | 6 - 20V | 14 — 5 Provide PWM Output | 6 | 50 mA | 48 KB (ATmega4809) | 6,144 Bytes (ATmega4809) | 16 MHz | 68.6 mm | 53.4 mm | 25 g | ATmega4809 (datasheet) | 5 | 20 mA | 256 Bytes (ATmega4809) | 25 | u-blox NINA-W102 (datasheet) | ATECC608A (datasheet) | LSM6DS3TR (datasheet) |
商品描述
The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a Bluetooth® Low Energy device sending data to a cellphone, the Arduino UNO WiFi Rev.2 is your one-stop-solution for many of the basic IoT application scenarios.
Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth® and some other enhancements. It incorporates the brand new ATmega4809 8-bit microcontroller from Microchip and has an onboard IMU (Inertial Measurement Unit) LSM6DS3TR.
The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point. It is the u-blox NINA-W102 and (here) you find the datasheet.
The Arduino UNO WiFi Rev.2 has 14 digital input/output pins—5 can be used as PWM outputs—6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.
联系供应商
Arduino
