2-jaw parallel self-centering pneumatic gripper (series HS)

series HS

Gimatic S.r.l.

2-jaw parallel self-centering pneumatic gripper (series SZ)

series SZ

Gimatic S.r.l.

2-position pneumatic rotary actuator, 2/8 bar, M5

series R

Gimatic S.r.l.

3-PHASE LINEAR TUBULAR BRUSHLESS MOTORS

Gimatic S.r.l.

3-jaw self-centring parallel electric gripper, 24Vdc, 11 W, PNP, M8 3-pin, peak 1.2A, servo DC motor with built-in controller, Max. 0.83 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

3-jaw self-centring parallel electric gripper, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.85 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

3-jaw self-centring parallel electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.95 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

3-position pneumatic rotary actuator, 2/8 bar, G1/8

series R

Gimatic S.r.l.

Actuator with built-in linear motor, size 25, voltage 300V, stroke 100 mm, built-in sensor ABZ

Gimatic S.r.l.

Actuator with built-in linear motor, size 25, voltage 300V, stroke 50 mm, built-in sensor ABZ

Gimatic S.r.l.

Actuator with built-in linear motor, size 25, voltage 70V, stroke 50 mm, built-in sensor ABZ

Gimatic S.r.l.

Aluminum extruded profiles

Gimatic S.r.l.

Angular self-centring pneumatic gripper, 2.5/8 bar, M5, Stroke 2x20°, Weight 100 g

Gimatic S.r.l.

Angular self-centring pneumatic gripper, 2.5/8 bar, M5, Stroke 2x20°, Weight 115 g

Gimatic S.r.l.

Angular self-centring pneumatic gripper, 2.5/8 bar, M5, sensor SS3N203-G, 0.9mm key

Gimatic S.r.l.

Angular self-centring pneumatic gripper, normally open, M5, sensor SS3N203-G, 0.9mm key

Gimatic S.r.l.

Cable with connector, D-sub 15-pin VGA type, female, length 1.5 metres, 0/250 Vac, max 0.5 A

Gimatic S.r.l.

Double-acting engagement gripper, diameter 20 mm, 4/8 bar, M3

Gimatic S.r.l.

EOAT Storage with MFI-A344, 60x60 mm

Gimatic S.r.l.

EOAT Storage with MFI-A41, 98x100 mm

Gimatic S.r.l.

EOAT Storage with MFI-A43, 158x160 mm

Gimatic S.r.l.

EPDM expansion gripper, size 8 mm, with M5 coaxial feeding, 4.5/8 bar

Gimatic S.r.l.

Electric linear guides

Gimatic S.r.l.

Electric rotary actuator, 180°/90°, 24Vdc, 11 W, PNP, M8 3-pin, peak 1.2A, servo DC motor with built-in controller, Max. 0.91 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

Electric rotary actuator, 180°/90°, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.62 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

Electric rotary actuator, 180°/90°, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.60 Hz at 30°C, IP54, with bushings

Gimatic S.r.l.

Engagement bushing, diameter 20 mm, with screw

Gimatic S.r.l.

Expansion micro gripper, NBR, size 4 mm, M5, threaded shank M10x1, 4.5/8 bar, with nut

series IFU

Gimatic S.r.l.

Expansion micro gripper, silicone, size 4 mm, M5, threaded shank M10x1, 4.5/8 bar, with nut

series IFU

Gimatic S.r.l.

Expansion micro gripper, silicone, size 7 mm, M5, threaded shank M10x1, 4.5/8 bar, with nut

series IFU

Gimatic S.r.l.

Guided cylinder with twin rods, clamp mounting, 2/8 bar, G1/8, Stroke 30 mm, Weight 405 g

Gimatic S.r.l.

Guided cylinder with twin rods, clamp mounting, 2/8 bar, G1/8, Stroke 30 mm, Weight 475 g

Gimatic S.r.l.

Guided cylinder with twin rods, clamp mounting, 2/8 bar, G1/8, Stroke 50 mm, Weight 520 g

Gimatic S.r.l.

Guided cylinder with twin rods, profile fastening, 2/8 bar, G1/8

Gimatic S.r.l.

Inductive sensor, diameter 3 mm, series SIS, magnetoresistive NPN N.O., 10/30 Vdc, 0.1 A, PUR round cable, 2.5 metres

Gimatic S.r.l.

Inductive sensor, diameter 3 mm, series SIS, magnetoresistive PNP N.O., 10/30 Vdc, 0.1 A, PUR round cable, 2.5 metres

Gimatic S.r.l.

Inductive sensor, diameter 4 mm, series SI, magnetoresistive NPN N.O., 10/30 Vdc, 0.1 A, PUR round cable, 2.5 metres

Gimatic S.r.l.

Inductive sensor, diameter 4 mm, series SI, magnetoresistive PNP N.O., 10/30 Vdc, 0.1 A, PUR round cable, 2.5 metres

Gimatic S.r.l.

Linear pneumatic actuator, belt-driven, with hydraulic shock-absorbers, 2/8 bar, G1/8, Stroke 300 mm

Gimatic S.r.l.

Linear pneumatic actuator, belt-driven, with hydraulic shock-absorbers, 2/8 bar, G1/8, Stroke 500 mm

Gimatic S.r.l.