Pneumatic tee fittings

Male stud run tee connects two female ports to one male port

Connection of 2 tubes at a 90° angle onto a male thread.

In line connection of 2 tubes at a 90° angle with a male thread.

Connection of 2 tubes at a 90° angle to a threaded port.

In line connection of 2 tubes at a 90° angle with another push-in fitting or cartridge.

Connection of 2 tubes at a 90° angle with another push-in fitting or cartridge.

In line connection of 2 tubes and at a 90° angle to a threaded port

Connection of 2 tubes at a 90° angle with a male thread.

Close or protect pneumatic circuits during production changeovers, storage operations, pneumatic circuits during transportation. Pre-assembled safety clip to prevent risk of accidental disconnection.

In line connection of 2 tubes of equal diameters.

Connection of 2 tubes at a 90° angle with a male thread.

Air distribution using 3 tubes at a 90° angle to the supply line. Can be fixed in position using 2 screws .

In line connection of 2 tubes at a 90° angle to a threaded port.

Connection at a 90° angle of 3 tubes of equal diameter.

Connection of 2 tubes at a 90° angle to a threaded port.

In line connection of 2 tubes at a 90° angle to a threaded port.

Connection of 2 tubes at a 90° angle to a threaded port.

All stainless steel construction. Body in full stainless steel 316L, collet in 303 stainless steel. Connection of 2 tubes at a 90° angle to a threaded port.

All stainless steel construction. Body in full stainless steel 316L, collet in 303 stainless steel. Connection of tubing at a 90° angle to a threaded port with reduced height dimensions.

All stainless steel 316L construction. In line connection of 2 tubes at a 90° angle to a threaded port.

All stainless steel 316L construction. Connection of 2 tubes at a 90° angle to a threaded port.

Connection of 2 tubes at a 90° angle with another push-in fitting or cartridge.

In-line connection of 2 tubes at a 90° angle with a male thread. Tightened on the top of the fitting with a flat spanner or socket wrench.

Connection of 2 tubes at a 90° angle to a threaded port. Tightened on the top of the fitting with a flat spanner or socket wrench.

Tee connection at a 90° angle of 3 tubes of equal or different diameters.

Connection of 2 tubes at a 90° angle with a male thread

Connection of 2 tubes at a 90° angle with a male thread

Connection of 2 tubes at a 90° angle to a threaded port. Tightened on the top of the fitting with a flat spanner or socket wrench