Elbows pneumatic fittings

Compression elbow - tube to tube

90 degree elbow with male and female ports

Compression elbow - tube to male thread

Compact connection of 2 tubes at a 90° angle onto a male thread.

Connection at a 90° angle of 2 tubes of equal or different diameters. Prevents constriction of tube inner diameter

Connection of tubing at 90° with a male thread. Tightened on the top of the fitting with a flat spanner or Allen key to facilitate assembly in tight spaces.

Connection of tubing at a 45° angle to a threaded port - for use when stud or 90° fittings put pressure on the tubes bend radius.

Connection of tubing at a 90° angle to a threaded port. Height dimensions are designed to pass over a 3109 elbow.

Connection of tubing at a 45° angle to a threaded port - for use when a stud or 90° fittings put pressure on the tube bend radius

Connection of 2 tubes through a panel, with optimised sealing between the fitting and the panel.

Tubing connection at a 90° angle on a swivel or oscillating threaded sub-base. Designed to limit constrictions in the tubing diameter when the cylinder is operating.

Connection of tubing at a 90° angle to a threaded port. Dimensions are designed to pass over a 3199 elbow.

Tube connection at a 45° angle with another push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.

Connection of tubing at a 90° angle to a push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.

Connection of tubing at a 90° angle with another push-in fitting or cartridge. Dimensions are designed to pass over a 3182 elbow. Useful on pneumatic control valves.

Connection of tubing at a 90° angle on a swivel or oscillating sub-base. Limits constrictions in the tubing diameter when the cylinder is operating

Connection of tubing at a 90° angle with a male thread.

Connection of tubing at a 90° angle with a male thread and reduced height dimensions.

Connection of tubing at a 90° angle with a male thread.

Air distribution using 6 tubes at a 90° angle to the supply line. Can be fixed in position using 2 screws.

Connection at a 90° angle of 2 tubes of equal diameter. Maintains bend radius of the tubing.

Connection of tubing at a 90° angle to a threaded port with reduced height dimensions.

Connection of tubing at a 90° angle to a threaded port. Height dimensions are designed to pass over a 3109 elbow.