tracepartsonline.net > List of 3D Parts Catalogs






Contents of the parts catalog on tracepartsonline.net

-



  • I.C.S TraceParts classification
  • Generalities
  • Graphical symbols
  • Numerals
  • Letters
  • 3D games
  • Technical drawings
  • Electrical and electronics engineering drawings
  • P&ID
  • Architecture
  • Ergonomics - Computer dummies
  • Environment. Health protection. Safety
  • Environmental protection
  • Wind turbine
  • Solar arrays
  • Air quality
  • Cleanrooms and associated controlled environments
  • Water quality
  • Water of natural resources
  • Safety of machinery
  • Anthropometric data
  • Interlocking devices for safety
  • Signs and markings
  • Ergonomics
  • Accident and disaster control
  • Protection against fire
  • Fire protection
  • Protection against crime
  • Metrology and measurement. Physical phenomena
  • Metrology and measurement in general
  • Linear and angular measurements
  • Measurement of force, weight and pressure
  • Thermodynamics and temperature measurements
  • Measurement systems
  • Electricity. Magnetism. Electrical and magnetic measurements
  • Measurement of electrical and magnetic quantities
  • Mechanical systems and components of general use
  • Fasteners
  • Bolts, screws, studs
  • Screws and bolts with hexagonal head
  • Screws and bolts with cylindrical head
  • Screws and bolts with countersunk head
  • Screws and bolts with various head
  • Setscrew
  • Tapping screws
  • Wood screws
  • Screws for plastic material
  • Studs
  • Threaded rods
  • Eye screws
  • Nuts
  • Hexagonal nuts
  • Castle nuts
  • Cap nuts
  • Square nuts
  • Knurled nuts
  • Slotted nuts
  • Wingnuts
  • Locknuts
  • Various nuts
  • Washers
  • Thrust washers
  • Various washers
  • Lockwashers
  • Tab washers
  • Spring washers
  • Clinch nuts
  • Wire thread inserts
  • Spacers
  • Rivets, ankles
  • Conventional rivets
  • Pop rivets
  • Special rivets
  • Fasteners for steel construction
  • Pins, nails
  • Cylindrical pins
  • Taper pins
  • Grooved pins
  • Split pins
  • Roll pins
  • Pins
  • Nails
  • Snap rings
  • Stop rings
  • Collars
  • Clamps
  • Clamping cylinders
  • Toggle Clamps
  • Toggle latches
  • Fork joint
  • Bushes
  • Sleeves
  • Plugs
  • Retaining magnets
  • Special fasteners
  • Hinges, eyelets and other articulated joints
  • Bearings
  • Plain bearings
  • Cylindrical plain bearings
  • Flanged plain bearings
  • Various plain bearings
  • Thrust bearings
  • Thrust bearings
  • Radial contact ball bearings
  • Angular contact ball bearings
  • Needle bearings
  • Roller bearings
  • Combined bearings
  • Cam rollers
  • Bearing accessories
  • Bearing blocks
  • Pillow block bearing
  • Flanged block bearing
  • Conveyor belt tensioners
  • Various block bearing
  • Block bearing accessories
  • Spherical bearing
  • Rod ends
  • Rotary table bearings
  • Shafts and couplings
  • Shafts
  • Couplings
  • Rigid couplings
  • Flexible couplings
  • Elastic couplings
  • Various couplings
  • Universal joint couplings
  • Keys and keyways, splines
  • Assemblers
  • Expandable sleeves
  • Shrink discs
  • Torque limiters
  • Friction torque limiters
  • Ball torque limiters
  • Roller torque limiters
  • Freewheels
  • Backstops
  • Clutches
  • Electrical clutches
  • Brakes
  • Electrical brakes
  • Seals, glands
  • Dynamic seals
  • O-ring
  • U seals
  • Stack seals
  • Lobed seals
  • Composite seals
  • Rotating mechanical seals
  • Lip seals for rotating shaft
  • Radial expansion seals
  • Guide strips
  • Braids - Rings
  • Static seals
  • Protective seals
  • Wiper seals
  • Protective caps
  • Boots, bellows seals
  • Dampers
  • Cushions
  • Vibration dampers
  • Hydraulic snubbers
  • Hydraulic dampers
  • Springs
  • Compression springs
  • Draw springs
  • Torsion springs
  • Gas Springs
  • Gears
  • Right spur gears
  • Spiral spur gears
  • Right angular gearings
  • Spiral angular gearings
  • Racks
  • Gears and worm screws
  • Flexible drives and transmissions
  • Belt drives and their components
  • Pulleys
  • Belt drives
  • Accessories
  • Chain drives and their components
  • Chain wheels
  • Chain drives
  • Accessories
  • Lubrication systems
  • Lubricators
  • Support elements
  • Stops
  • Pillars
  • Feet
  • Supports
  • Heads
  • Plates, circulate plates
  • Angle bases
  • Screws
  • Indexing and locating elements
  • Cylindrical pins
  • Indexing plungers
  • Tenons
  • Spring plungers
  • Linear motions
  • Linear motion systems
  • Linear Actuators
  • Screw jacks
  • Ball screws
  • Keystone-shaped screws
  • Automation tables
  • Linear motors
  • Linear guidance systems
  • Ball bearing sleeves
  • Linear guidance systems on shafts
  • Linear ball bearings
  • Linear roller bearings
  • Track roller linear guidance systems
  • Plain guidings
  • Accessories
  • Rotary rigid power transmissions
  • Sleeve angular gears
  • Shaft angular gears
  • Low clearance reducers
  • Coaxial gear reducers
  • Parallel shaft reduction gear
  • Mitre gear reducers
  • Worm drive reducers
  • Helical gear units
  • Planetary gear reducers
  • Helical geared motors
  • Fluid systems and components of general use
  • Pipeline components and pipelines
  • Pipeline components and pipelines in general
  • Metal fittings, all fluids
  • Instant fittings, nickel-plated brass
  • Instant fittings, stainless steel
  • Compression fittings, brass
  • Compression fittings, stainless steel
  • Rotating unions
  • Plastics pipes
  • Metal fittings, piping
  • Caps
  • Elbows
  • Tees
  • Reducers
  • Plastics fittings
  • Flanges, couplings and joints
  • Weld-on plain flanges
  • Losse plain flanges
  • Weld-on plain collar
  • Blind flanges
  • Weld-on neck flanges
  • Weld-neck collars
  • Weld-on or threaded hubbed neck flanges
  • Plain or threaded plain oval flanges
  • Lapped collars
  • Square flanges
  • Rectangular flanges
  • Couplings, valves, control valves
  • Couplings
  • Ball and plug valves
  • Valves with deformable enclosure
  • Needle valves
  • Pressure regulators
  • Check valves
  • Check valves
  • Other valves
  • Solenoid valves
  • Valves
  • Control valves
  • Valves
  • Manual valves
  • Pneumatic valves
  • Electrical valves
  • Special valves
  • Valves accessories
  • Couplings
  • Fluid power systems
  • Pneumatic cylinders
  • Pneumatic valves
  • Logic Elements
  • Pneumatic cylinders accessories
  • Control components
  • Filters, seals and contamination of fluids
  • Pneumatic fittings
  • Instant fittings HR polymer
  • Instant fittings, nickel-plated brass
  • Instant fittings, stainless steel
  • Compression fittings, brass
  • Compression fittings, stainless steel
  • Pneumatic function fittings
  • Threaded accessories
  • Industrial ball valves
  • Technical tubes and hoses
  • Hydraulic cylinders
  • Hydraulic cylinders accessories
  • Hydraulic fittings
  • Cutting ring couplings DIN 2353
  • Cone sealing couplings with 24° cone, ISO 8434-1
  • Function couplings
  • Bodies only
  • Accessories
  • Forged steel fittings
  • Various couplings
  • Power units
  • Hydraulic blocks
  • Pumps
  • Pneumatic pumps
  • Manual pumps
  • Various hydraulic pumps
  • Hydraulic fuses
  • Vacuum technology
  • Suction cups
  • Suction cup accessories
  • Vacuum generator
  • Vacuum generator accessories
  • Vacuum switches
  • Accumulators
  • Membrane-type accumulators
  • Bladder-type accumulators
  • Accessories
  • Schematic symbols
  • Manufacturing engineering
  • Industrial automation systems
  • Industrial automation systems in general
  • Industrial robots. Manipulators
  • Mechatronics
  • Industrial process measurement and control
  • Control and follow-up documents
  • Supports
  • Linear motions
  • Angular motions
  • Gripping clamps
  • Mounting accessories
  • Assembling profiles
  • Assembling accessories
  • Manual fastening
  • Cutout and pressing
  • Fasteners
  • Plain guidings
  • Ball guidings
  • Elements of friction
  • Punch
  • Matrices
  • Retainer blocks
  • Standard die set
  • Springs
  • Demountable blocks
  • Pneumatic cylinders
  • Miscellaneous
  • Machine tool systems
  • Cutting tools and accessories
  • Manual fastening
  • Mandrels
  • Handwheels
  • Handles
  • Operating handles
  • Indicators
  • Hinges
  • Locks
  • Latches
  • Industrial disk brakes
  • Bellows seals, machine guards
  • Gun drills
  • Chipless working equipment
  • Elements of friction
  • Moulding equipment
  • Mould bases
  • Centring elements
  • Guiding elements
  • Ejecting elements
  • Injecting elements
  • Springs
  • Regulation elements
  • Miscellaneous
  • Elements of friction
  • Hot runner
  • Nozzles
  • Blocks
  • Accessories
  • Hand-held tools
  • Hand-operated tools
  • Energy and heat transfer engineering
  • Energy and heat transfer engineering in general
  • Pipes and piping
  • Burners. Boilers
  • Solar energy engineering
  • Heating systems
  • Refrigerating technology
  • Electrical engineering
  • Electrical engineering in general
  • Terminal blocks
  • Circuit breaker
  • Contactors
  • Connectors
  • Round connectors
  • Various connectors
  • Relay
  • Control relays
  • Timing relays
  • Protection relays
  • Various relays
  • Protection elements
  • Motor starter
  • Controls and warnings
  • Command interface
  • Automated systems
  • Current supply
  • Current transformer
  • Junction blocks
  • Measuring and testing instrument
  • Insulating materials
  • Electrical wires and cables
  • Accessories
  • Components for electrical equipment
  • Enclosures and switch boxes
  • Components for enclosures and switch boxes
  • Fastening elements
  • Accessories for enclosures and switch boxes
  • Electrical accessories
  • Electrical accessories
  • Plugs, socket-outlets, couplers
  • Switches
  • Circuit breaker
  • Contactors
  • Relays
  • Junction blocks
  • Fuses and other overcurrent protection devices
  • Protection elements
  • Controls and warnings
  • Other electrical accessories
  • Switchgear and controlgear
  • Connectors
  • Electrical rotating machinery
  • Motors
  • Direct current
  • Permanent magnet, without brake
  • Micro-motors
  • Step motors
  • Brushless
  • Asynchronous electric motors
  • Accessories
  • General
  • Servomotors brushless
  • Gear motors
  • Wind turbines
  • Variable speed drive
  • Motor control
  • Accessories
  • Transformers. Reactors
  • Rectifiers. Converters. Stabilized power supply
  • Mechanical and electronic detection
  • Limit switch
  • Photo-electric detector
  • Inductive detector
  • Magnetic detector
  • Capacitive detector
  • Ultrasonic detector
  • Various detector
  • Safety light curtain
  • Flow Rate Sensors
  • Fluid sensors
  • Proximity sensors
  • Weighing and force sensors
  • Torque sensors
  • Temperature sensors
  • Humidity sensors
  • Pressostat
  • Inclinometer
  • Encoder
  • Safety mat
  • Accessories
  • Amplifiers and fibres
  • Electrical actuators
  • Solenoids
  • Logic Modules
  • Schematic symbols
  • Software
  • NF C15-100 calculating
  • NF C15-712 calculating
  • NF C17-200 calculating
  • Electrical diagrams
  • Cabling
  • Electrical CAD
  • Electronics
  • Electronic components in general
  • Thermistors
  • Relays
  • Capacitors
  • Electronic display devices
  • Electric filters
  • Printed circuits and boards
  • Electronic component assemblies
  • Optoelectronics. Laser equipment
  • Components for electronics industry
  • Connectors
  • Circuit Breakers for Equipment
  • Input Systems
  • Relays
  • Diodes
  • Switches
  • Current transformer
  • Other components
  • Accessories
  • Information technology. Office machines
  • Information technology (IT) in general
  • Automation Controllers
  • Distributed I/O Modules
  • Open HMI Platforms
  • Industrial I/O
  • Industrial Communication
  • Industrial PC
  • Vision and identification equipment
  • Software
  • CAD Software
  • Software of computer assisted drawing
  • CAM Software
  • Technical Software
  • Software of design validation
  • Software of Product Data Management
  • Software of Enterprise Resource Planning (ERP)
  • Software for acquisition and analysis of data
  • Vision software
  • Software for automation
  • Product documentation software
  • Software of rendering
  • Software of display
  • Free software
  • Networking
  • IT terminal and other peripheral equipment
  • Visual display terminals
  • Printers and plotters
  • Hardware for acquisition and analysis of data
  • Data storage devices
  • Image technology
  • Vision
  • Identification
  • Road vehicles engineering
  • Road vehicle systems
  • Bodies and body components
  • Shipbuilding and marine structures
  • Shipbuilding and marine structures in general
  • Cargo spaces
  • Aircraft and space vehicle engineering
  • Fasteners for aerospace construction
  • Bolts, screws, studs
  • Clinch nuts
  • Rings
  • Other fasteners
  • Aerospace electric equipment and systems
  • Electrical connectors
  • Materials handling equipment
  • Lifting equipment
  • Lifting appliances in general
  • Accessories for lifting equipment
  • Continuous handling equipment
  • Components for conveyors
  • Archimedes screw
  • Industrial trucks
  • Wheels and castors
  • Handling ball-units
  • Handling trolleys
  • Storage equipment
  • Labelling
  • Packaging and distribution of goods
  • Packaging materials and accessories
  • Barrels. Drums. Canisters
  • Cases. Boxes. Crates
  • Freight distribution of goods
  • General purpose containers
  • Packaging machinery
  • Agriculture
  • Agricultural machines, implements and equipment
  • Equipment for storage, preparation and distribution of fertilizers
  • Food technology
  • Materials and articles in contact with foodstuffs
  • Mining and minerals
  • Mining equipment
  • Petroleum and related technologies
  • Lubricants, industrial oils and related products
  • Equipment for petroleum and natural gas industries
  • Pipeline components and pipelines in general
  • Flanges
  • Caps
  • Elbows
  • Tees
  • Reducers
  • Blinds
  • Sealing gaskets
  • Petroleum products and natural gas handling equipment
  • Metallurgy
  • Non-ferrous metals
  • Aluminium alloy profiles
  • Iron and steel products
  • Stainless steels
  • Flats
  • Profiles
  • Plates
  • Tubes
  • Iron profiles
  • Rubber and plastic industries
  • Rubber and plastics products
  • Plastics pipes, fittings and valves
  • Seals
  • Adhesives
  • Construction materials and building
  • Physical planning. Town planning
  • Elements of buildings
  • Ceilings. Floors. Stairs
  • Doors and windows
  • Installations in buildings
  • Ventilation and air-conditioning systems
  • Sanitary installations
  • Building accessories
  • Handles
  • Hinges
  • Locks
  • Latches
  • Civil engineering
  • External sewage systems
  • Domestic and commercial equipment. Entertainment. Sports
  • Furniture
  • Office furniture
  • Accessories for furniture

    • - 0101 - MALE STUD COUPLING, BSP PARALLEL AND METRIC

    0101 - MALE STUD COUPLING, BSP PARALLEL AND METRIC
    - 0101 - MALE STUD COUPLING, BSP PARALLEL AND METRIC
    List of part numbers


    - 0105 - MALE STUD COUPLING BSPT AND NPT

    0105 - MALE STUD COUPLING BSPT AND NPT
    - 0105 - MALE STUD COUPLING BSPT AND NPT
    List of part numbers


    - 0109 - MALE STUD ELBOW BSP TAPER AND NPT THREAD

    0109 - MALE STUD ELBOW BSP TAPER AND NPT THREAD
    - 0109 - MALE STUD ELBOW BSP TAPER AND NPT THREAD
    List of part numbers


    - 0114 - FEMALE STUD COUPLING, BSP PARALLEL THREAD

    0114 - FEMALE STUD COUPLING, BSP PARALLEL THREAD
    - 0114 - FEMALE STUD COUPLING, BSP PARALLEL THREAD
    List of part numbers


    - 1/2

    1/2'' to 2 1/4'' hydraulic or pneumatic locking RTV
    - 1/2'' to 2 1/4'' hydraulic or pneumatic locking RTV
    List of part numbers


    - 1/4

    1/4'' & 3/8'' hydraulic or pneumatic locking RTP
    - 1/4'' & 3/8'' hydraulic or pneumatic locking RTP
    List of part numbers


    - 3601 - MALE STUD, BSP PARALLEL AND METRIC

    3601 - MALE STUD, BSP PARALLEL AND METRIC
    - 3601 - MALE STUD, BSP PARALLEL AND METRIC
    List of part numbers


    - 3602 - EQUAL ELBOW

    3602 - EQUAL ELBOW
    - 3602 - EQUAL ELBOW
    List of part numbers


    - 3603 - MALE STUD RUN TEE, BSP/NPT TAPER

    3603 - MALE STUD RUN TEE, BSP/NPT TAPER
    - 3603 - MALE STUD RUN TEE, BSP/NPT TAPER
    List of part numbers


    - 3604 - EQUAL TEE

    3604 - EQUAL TEE
    - 3604 - EQUAL TEE
    List of part numbers


    - 3606 - EQUAL TUBE TO TUBE CONNECTOR

    3606 - EQUAL TUBE TO TUBE CONNECTOR
    - 3606 - EQUAL TUBE TO TUBE CONNECTOR
    List of part numbers


    - 3608 - MALE STUD BRANCH TEE, BSP/NPT TAPER

    3608 - MALE STUD BRANCH TEE, BSP/NPT TAPER
    - 3608 - MALE STUD BRANCH TEE, BSP/NPT TAPER
    List of part numbers


    - 3609 - MALE STUD ELBOW, BSP/NPT TAPER

    3609 - MALE STUD ELBOW, BSP/NPT TAPER
    - 3609 - MALE STUD ELBOW, BSP/NPT TAPER
    List of part numbers


    - 3614 - FEMALE STUD, BSP PARALLEL AND METRIC

    3614 - FEMALE STUD, BSP PARALLEL AND METRIC
    - 3614 - FEMALE STUD, BSP PARALLEL AND METRIC
    List of part numbers


    - 3616 - EQUAL BULKHEAD CONNECTOR

    3616 - EQUAL BULKHEAD CONNECTOR
    - 3616 - EQUAL BULKHEAD CONNECTOR
    List of part numbers


    - 3620 - DOUBLE MALE STEM CONNECTOR

    3620 - DOUBLE MALE STEM CONNECTOR
    - 3620 - DOUBLE MALE STEM CONNECTOR
    List of part numbers


    - 3621 - MALE STUD STANDPIPE, BSP TAPER

    3621 - MALE STUD STANDPIPE, BSP TAPER
    - 3621 - MALE STUD STANDPIPE, BSP TAPER
    List of part numbers


    - 3622 - PLUG-IN BARBED CONNECTOR

    3622 - PLUG-IN BARBED CONNECTOR
    - 3622 - PLUG-IN BARBED CONNECTOR
    List of part numbers


    - 3626 - BLANKING PLUG

    3626 - BLANKING PLUG
    - 3626 - BLANKING PLUG
    List of part numbers


    - 3629 - EXTENDED STUD ELBOW, BSP TAPER

    3629 - EXTENDED STUD ELBOW, BSP TAPER
    - 3629 - EXTENDED STUD ELBOW, BSP TAPER
    List of part numbers


    - 3631 - MALE STUD STANDPIPE, BSP PARALLEL AND METRIC

    3631 - MALE STUD STANDPIPE, BSP PARALLEL AND METRIC
    - 3631 - MALE STUD STANDPIPE, BSP PARALLEL AND METRIC
    List of part numbers


    - 3639 - EQUAL BULKHEAD ELBOW

    3639 - EQUAL BULKHEAD ELBOW
    - 3639 - EQUAL BULKHEAD ELBOW
    List of part numbers


    - 3666 - PLUG-IN REDUCER

    3666 - PLUG-IN REDUCER
    - 3666 - PLUG-IN REDUCER
    List of part numbers


    - 3667 - PLUG-IN METRIC/IMPERIAL ADAPTOR

    3667 - PLUG-IN METRIC/IMPERIAL ADAPTOR
    - 3667 - PLUG-IN METRIC/IMPERIAL ADAPTOR
    List of part numbers


    - 3668 - PLUG-IN INCREASER

    3668 - PLUG-IN INCREASER
    - 3668 - PLUG-IN INCREASER
    List of part numbers


    - 3669 - EXTENDED STUD ELBOW, BSP PARALLEL AND METRIC

    3669 - EXTENDED STUD ELBOW, BSP PARALLEL AND METRIC
    - 3669 - EXTENDED STUD ELBOW, BSP PARALLEL AND METRIC
    List of part numbers


    - 3675 - MALE STUD, BSP/NPT TAPER

    3675 - MALE STUD, BSP/NPT TAPER
    - 3675 - MALE STUD, BSP/NPT TAPER
    List of part numbers


    - 3681 - MALE STUD, METRIC THREAD

    3681 - MALE STUD, METRIC THREAD
    - 3681 - MALE STUD, METRIC THREAD
    List of part numbers


    - 3693 - MALE STUD RUN TEE, BSP PARALLEL AND METRIC

    3693 - MALE STUD RUN TEE, BSP PARALLEL AND METRIC
    - 3693 - MALE STUD RUN TEE, BSP PARALLEL AND METRIC
    List of part numbers


    - 3698 - MALE STUD BRANCH TEE, BSP PARALLEL AND METRIC

    3698 - MALE STUD BRANCH TEE, BSP PARALLEL AND METRIC
    - 3698 - MALE STUD BRANCH TEE, BSP PARALLEL AND METRIC
    List of part numbers


    - 3699 - STUD ELBOW, BSP PARALLEL AND METRIC

    3699 - STUD ELBOW, BSP PARALLEL AND METRIC
    - 3699 - STUD ELBOW, BSP PARALLEL AND METRIC
    List of part numbers


    - 3801 - MALE STUD, BSP PARALLEL METRIC AND UNF

    3801 - MALE STUD, BSP PARALLEL METRIC AND UNF
    - 3801 - MALE STUD, BSP PARALLEL METRIC AND UNF
    List of part numbers


    - 3802 - EQUAL ELBOW

    3802 - EQUAL ELBOW
    - 3802 - EQUAL ELBOW
    List of part numbers


    - 3803 - MALE STUD RUN TEE, BSP TAPER AND NPT

    3803 - MALE STUD RUN TEE, BSP TAPER AND NPT
    - 3803 - MALE STUD RUN TEE, BSP TAPER AND NPT
    List of part numbers


    - 3804 - EQUAL TEE

    3804 - EQUAL TEE
    - 3804 - EQUAL TEE
    List of part numbers


    - 3805 - MALE STUD, BSP TAPER AND NPT

    3805 - MALE STUD, BSP TAPER AND NPT
    - 3805 - MALE STUD, BSP TAPER AND NPT
    List of part numbers


    - 3806 - EQUAL STRAIGHT CONNECTOR

    3806 - EQUAL STRAIGHT CONNECTOR
    - 3806 - EQUAL STRAIGHT CONNECTOR
    List of part numbers


    - 3808 - MALE STUD BRANCH TEE, BSP TAPER AND NPT

    3808 - MALE STUD BRANCH TEE, BSP TAPER AND NPT
    - 3808 - MALE STUD BRANCH TEE, BSP TAPER AND NPT
    List of part numbers


    - 3809 - MALE STUD ELBOW, BSP TAPER

    3809 - MALE STUD ELBOW, BSP TAPER
    - 3809 - MALE STUD ELBOW, BSP TAPER
    List of part numbers


    - 3816 - EQUAL BULKHEAD CONNECTOR

    3816 - EQUAL BULKHEAD CONNECTOR
    - 3816 - EQUAL BULKHEAD CONNECTOR
    List of part numbers


    - 3821 - MALE STUD STANDPIPE, BSP TAPER AND NPT

    3821 - MALE STUD STANDPIPE, BSP TAPER AND NPT
    - 3821 - MALE STUD STANDPIPE, BSP TAPER AND NPT
    List of part numbers


    - 3866 - PUSH-IN REDUCER

    3866 - PUSH-IN REDUCER
    - 3866 - PUSH-IN REDUCER
    List of part numbers


    - 3889 - COMPACT MALE STUD ELBOW, BSP TAPER AND NPT THREAD

    3889 - COMPACT MALE STUD ELBOW, BSP TAPER AND NPT THREAD
    - 3889 - COMPACT MALE STUD ELBOW, BSP TAPER AND NPT THREAD
    List of part numbers


    - 45° Elbow - parallel threaded sockets - HFV

    45° Elbow - parallel threaded sockets - HFV
    - 45° Elbow - parallel threaded sockets - HFV
    List of part numbers


    - 45° Elbow - socket for solvent welding - HLV

    45° Elbow - socket for solvent welding - HLV
    - 45° Elbow - socket for solvent welding - HLV
    List of part numbers


    - 45° Elbow with sockets for solvent welding - HIV

    45° Elbow with sockets for solvent welding - HIV
    - 45° Elbow with sockets for solvent welding - HIV
    List of part numbers


    - 45° Tee with sockets for solvent welding - YIV

    45° Tee with sockets for solvent welding - YIV
    - 45° Tee with sockets for solvent welding - YIV
    List of part numbers


    - 5111 : Raccords union à portée conique - lisse / lisse - Inox 316 L

    5111 : Raccords union à portée conique - lisse / lisse - Inox 316 L
    - 5111 : Raccords union à portée conique - lisse / lisse - Inox 316 L
    List of part numbers


    - 5112 : Raccords union à portée conique - Lisse / mâle - Inox 316 L - Gaz - NPT

    5112 : Raccords union à portée conique - Lisse / mâle - Inox 316 L - Gaz - NPT
    - 5112 : Raccords union à portée conique - Lisse / mâle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5113 : Raccords union à portée conique - Lisse / femelle - Inox 316 L - Gaz - NPT

    5113 : Raccords union à portée conique - Lisse / femelle - Inox 316 L - Gaz - NPT
    - 5113 : Raccords union à portée conique - Lisse / femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5114 : Raccords union à portée conique - Mâle / mâle - Inox 316 L - Gaz - NPT

    5114 : Raccords union à portée conique - Mâle / mâle - Inox 316 L - Gaz - NPT
    - 5114 : Raccords union à portée conique - Mâle / mâle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5115 : Raccords union à portée conique - Mâle / femelle - Inox 316 L - Gaz - NPT

    5115 : Raccords union à portée conique - Mâle / femelle - Inox 316 L - Gaz - NPT
    - 5115 : Raccords union à portée conique - Mâle / femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5116 : Raccords union à portée conique - Femelle / femelle - Inox 316 L - Gaz - NPT

    5116 : Raccords union à portée conique - Femelle / femelle - Inox 316 L - Gaz - NPT
    - 5116 : Raccords union à portée conique - Femelle / femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5121 : Raccords union à joint plat (PTFE en standard) - Lisse / lisse - Inox 316 L

    5121 : Raccords union à joint plat (PTFE en standard) - Lisse / lisse - Inox 316 L
    - 5121 : Raccords union à joint plat (PTFE en standard) - Lisse / lisse - Inox 316 L
    List of part numbers


    - 5122 : Raccords union à joint plat (PTFE en standard) - Lisse / mâle - Inox 316 L - Gaz - NPT

    5122 : Raccords union à joint plat (PTFE en standard) - Lisse / mâle - Inox 316 L - Gaz - NPT
    - 5122 : Raccords union à joint plat (PTFE en standard) - Lisse / mâle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5123 : Raccords union à joint plat (PTFE en standard) - Lisse- femelle - Inox 316 L - Gaz - NPT

    5123 : Raccords union à joint plat (PTFE en standard) - Lisse- femelle - Inox 316 L - Gaz - NPT
    - 5123 : Raccords union à joint plat (PTFE en standard) - Lisse- femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5124 : Raccords union à joint plat (PTFE en standard) - Mâle / mâle - Inox 316 L - Gaz - NPT

    5124 : Raccords union à joint plat (PTFE en standard) - Mâle / mâle - Inox 316 L - Gaz - NPT
    - 5124 : Raccords union à joint plat (PTFE en standard) - Mâle / mâle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5125 : Raccords union à joint plat (PTFE en standard) - Mâle / femelle - Inox 316 L - Gaz - NPT

    5125 : Raccords union à joint plat (PTFE en standard) - Mâle / femelle - Inox 316 L - Gaz - NPT
    - 5125 : Raccords union à joint plat (PTFE en standard) - Mâle / femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5126 : Raccords union à joint plat (PTFE en standard) - Femelle / femelle - Inox 316 L - Gaz - NPT

    5126 : Raccords union à joint plat (PTFE en standard) - Femelle / femelle - Inox 316 L - Gaz - NPT
    - 5126 : Raccords union à joint plat (PTFE en standard) - Femelle / femelle - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5141 : Raccords union à portée conique - Lisse / cannelé - Inox 316 L

    5141 : Raccords union à portée conique - Lisse / cannelé - Inox 316 L
    - 5141 : Raccords union à portée conique - Lisse / cannelé - Inox 316 L
    List of part numbers


    - 5142 : Raccords union à portée conique - Mâle / cannelé - Inox 316 - Gaz - NPT

    5142 : Raccords union à portée conique - Mâle / cannelé - Inox 316 - Gaz - NPT
    - 5142 : Raccords union à portée conique - Mâle / cannelé - Inox 316 - Gaz - NPT
    List of part numbers


    - 5143 : Raccords union à portée conique - Femelle / cannelé - Inox 316 L - Gaz - NPT

    5143 : Raccords union à portée conique - Femelle / cannelé - Inox 316 L - Gaz - NPT
    - 5143 : Raccords union à portée conique - Femelle / cannelé - Inox 316 L - Gaz - NPT
    List of part numbers


    - 5211 : Embout mâle - Inox 316 L

    5211 : Embout mâle - Inox 316 L
    - 5211 : Embout mâle - Inox 316 L
    List of part numbers


    - 5212 : Embout mâle - Inox 316 L - L=100

    5212 : Embout mâle - Inox 316 L - L=100
    - 5212 : Embout mâle - Inox 316 L - L=100
    List of part numbers


    - 5213 : Embout mâle - Inox 316 L - Longueur 150 mm

    5213 : Embout mâle - Inox 316 L - Longueur 150 mm
    - 5213 : Embout mâle - Inox 316 L - Longueur 150 mm
    List of part numbers


    - 5214 : Embout mâle - Inox 316L - Longueur 200 mm

    5214 : Embout mâle - Inox 316L - Longueur 200 mm
    - 5214 : Embout mâle - Inox 316L - Longueur 200 mm
    List of part numbers


    - 5215 : Mamelon cylindrique - Inox 316 L

    5215 : Mamelon cylindrique - Inox 316 L
    - 5215 : Mamelon cylindrique - Inox 316 L
    List of part numbers


    - 5216 : Mamelon cylindrique - Inox 316L - longueur 100 mm

    5216 : Mamelon cylindrique - Inox 316L - longueur 100 mm
    - 5216 : Mamelon cylindrique - Inox 316L - longueur 100 mm
    List of part numbers


    - 5217 : Mamelon cylindrique - Inox 316L - longueur 150 mm

    5217 : Mamelon cylindrique - Inox 316L - longueur 150 mm
    - 5217 : Mamelon cylindrique - Inox 316L - longueur 150 mm
    List of part numbers


    - 5218 : Mamelon cylindrique - Inox 316L - longueur 200 mm

    5218 : Mamelon cylindrique - Inox 316L - longueur 200 mm
    - 5218 : Mamelon cylindrique - Inox 316L - longueur 200 mm
    List of part numbers


    - 5221 : Mamelon hexagonal - Inox 316

    5221 : Mamelon hexagonal - Inox 316
    - 5221 : Mamelon hexagonal - Inox 316
    List of part numbers


    - 5222 : Bobine entièrement filetée - Inox 316

    5222 : Bobine entièrement filetée - Inox 316
    - 5222 : Bobine entièrement filetée - Inox 316
    List of part numbers


    - 5224 : Traversée de cloison - Inox 316 L

    5224 : Traversée de cloison - Inox 316 L
    - 5224 : Traversée de cloison - Inox 316 L
    List of part numbers


    - 5235 : Mamelon hexagonal à souder pour flexible - Inox 316 L

    5235 : Mamelon hexagonal à souder pour flexible - Inox 316 L
    - 5235 : Mamelon hexagonal à souder pour flexible - Inox 316 L
    List of part numbers


    - 5237 : Réduction mâle / femelle - Inox 316 L - usinée

    5237 : Réduction mâle / femelle - Inox 316 L - usinée
    - 5237 : Réduction mâle / femelle - Inox 316 L - usinée
    List of part numbers


    - 5238 : Réduction femelle / mâle - Inox 316 L - usinée

    5238 : Réduction femelle / mâle - Inox 316 L - usinée
    - 5238 : Réduction femelle / mâle - Inox 316 L - usinée
    List of part numbers


    - 5239 : Réduction femelle / femelle - Inox 316L - usinée

    5239 : Réduction femelle / femelle - Inox 316L - usinée
    - 5239 : Réduction femelle / femelle - Inox 316L - usinée
    List of part numbers


    - 5240 : Coude femelle / femelle 90° réduit - Inox 316

    5240 : Coude femelle / femelle 90° réduit - Inox 316
    - 5240 : Coude femelle / femelle 90° réduit - Inox 316
    List of part numbers


    - 5241 : Réduction mâle / mâle - Inox 316L - usinée

    5241 : Réduction mâle / mâle - Inox 316L - usinée
    - 5241 : Réduction mâle / mâle - Inox 316L - usinée
    List of part numbers


    - 5243 : Adaptateur femelle / mâle - inox 316L

    5243 : Adaptateur femelle / mâle - inox 316L
    - 5243 : Adaptateur femelle / mâle - inox 316L
    List of part numbers


    - 5244 : Coude femelle / femelle 90° - Inox 316

    5244 : Coude femelle / femelle 90° - Inox 316
    - 5244 : Coude femelle / femelle 90° - Inox 316
    List of part numbers


    - 5245 : Coude femelle / femelle 45° - Inox 316

    5245 : Coude femelle / femelle 45° - Inox 316
    - 5245 : Coude femelle / femelle 45° - Inox 316
    List of part numbers


    - 5246 : Coude mâle / femelle 90° - Inox 316

    5246 : Coude mâle / femelle 90° - Inox 316
    - 5246 : Coude mâle / femelle 90° - Inox 316
    List of part numbers


    - 5247 : Coude mâle / mâle 90° grand rayon - Inox 316

    5247 : Coude mâle / mâle 90° grand rayon - Inox 316
    - 5247 : Coude mâle / mâle 90° grand rayon - Inox 316
    List of part numbers


    - 5248 : Té 3 branches femelles - Inox 316

    5248 : Té 3 branches femelles - Inox 316
    - 5248 : Té 3 branches femelles - Inox 316
    List of part numbers


    - 5249 : Croix femelle - Inox 316

    5249 : Croix femelle - Inox 316
    - 5249 : Croix femelle - Inox 316
    List of part numbers


    - 5250 : Té 3 branches femelles réduit - Inox 316

    5250 : Té 3 branches femelles réduit - Inox 316
    - 5250 : Té 3 branches femelles réduit - Inox 316
    List of part numbers


    - 5251 : Coude union mâle / femelle 90° - Inox 316

    5251 : Coude union mâle / femelle 90° - Inox 316
    - 5251 : Coude union mâle / femelle 90° - Inox 316
    List of part numbers


    - 5252 : Coude union femelle / femelle - Inox 316

    5252 : Coude union femelle / femelle - Inox 316
    - 5252 : Coude union femelle / femelle - Inox 316
    List of part numbers


    - 5261 : Adaptateur cylindrique mâle / cannelé - Inox 316 L

    5261 : Adaptateur cylindrique mâle / cannelé - Inox 316 L
    - 5261 : Adaptateur cylindrique mâle / cannelé - Inox 316 L
    List of part numbers


    - 5262 : Adaptateur lisse / cannelé - Inox 316 L

    5262 : Adaptateur lisse / cannelé - Inox 316 L
    - 5262 : Adaptateur lisse / cannelé - Inox 316 L
    List of part numbers


    - 5263 : Adaptateur cannelé / cannelé - Inox 316 L

    5263 : Adaptateur cannelé / cannelé - Inox 316 L
    - 5263 : Adaptateur cannelé / cannelé - Inox 316 L
    List of part numbers


    - 5266 : Ecrou tournant cannelé - Inox 316 L (livré sans joint plat)

    5266 : Ecrou tournant cannelé - Inox 316 L (livré sans joint plat)
    - 5266 : Ecrou tournant cannelé - Inox 316 L (livré sans joint plat)
    List of part numbers


    - 5610 : Coude ISO à 45° (roulé soudé) - inox 304 L -316 L

    5610 : Coude ISO à 45° (roulé soudé) - inox 304 L -316 L
    - 5610 : Coude ISO à 45° (roulé soudé) - inox 304 L -316 L
    List of part numbers


    - 5611 : Coude ISO 3D à 90° (roulé soudé) - inox 304 L - 316 L

    5611 : Coude ISO 3D à 90° (roulé soudé) - inox 304 L - 316 L
    - 5611 : Coude ISO 3D à 90° (roulé soudé) - inox 304 L - 316 L
    List of part numbers


    - 5612 : Coude ISO 3D à 90° - étiré sans soudure - inox 304 L - 316 L

    5612 : Coude ISO 3D à 90° - étiré sans soudure - inox 304 L - 316 L
    - 5612 : Coude ISO 3D à 90° - étiré sans soudure - inox 304 L - 316 L
    List of part numbers


    - 5613 : Coude ISO 3D à 90° forte épaisseur (roulé soudé) - inox 304 L -316 L

    5613 : Coude ISO 3D à 90° forte épaisseur (roulé soudé) - inox 304 L -316 L
    - 5613 : Coude ISO 3D à 90° forte épaisseur (roulé soudé) - inox 304 L -316 L
    List of part numbers


    - 5615 : Coude ISO 5D à 90° (roulé soudé) - inox 304 L - 316 L

    5615 : Coude ISO 5D à 90° (roulé soudé) - inox 304 L - 316 L
    - 5615 : Coude ISO 5D à 90° (roulé soudé) - inox 304 L - 316 L
    List of part numbers


    - 5616 : Coude ISO 5D à 90° - étiré sans soudure - inox 304 L - 316 L

    5616 : Coude ISO 5D à 90° - étiré sans soudure - inox 304 L - 316 L
    - 5616 : Coude ISO 5D à 90° - étiré sans soudure - inox 304 L - 316 L
    List of part numbers


    - 5617 : Coude métrique 1,5D à 90° - roulé soudé - inox 304 L - 316 L

    5617 : Coude métrique 1,5D à 90° - roulé soudé - inox 304 L - 316 L
    - 5617 : Coude métrique 1,5D à 90° - roulé soudé - inox 304 L - 316 L
    List of part numbers


    - 5618 : Réduction concentrique ISO épaisseur 2 mm (roulé soudé) - inox 304 L - 316 L

    5618 : Réduction concentrique ISO épaisseur 2 mm (roulé soudé) - inox 304 L - 316 L
    - 5618 : Réduction concentrique ISO épaisseur 2 mm (roulé soudé) - inox 304 L - 316 L
    List of part numbers


    - 5621 : Réduction concentrique métrique (roulé / soudé) - Inox 304L - 316L16 L

    5621 : Réduction concentrique métrique (roulé / soudé) - Inox 304L - 316L16 L
    - 5621 : Réduction concentrique métrique (roulé / soudé) - Inox 304L - 316L16 L
    List of part numbers


    - 5623 : Té ISO sans manchette - roulé soudé - inox 304 L - 316 L

    5623 : Té ISO sans manchette - roulé soudé - inox 304 L - 316 L
    - 5623 : Té ISO sans manchette - roulé soudé - inox 304 L - 316 L
    List of part numbers


    - 5624 : Té ISO avec manchette (roulé soudé) - Inox 304L - 316L

    5624 : Té ISO avec manchette (roulé soudé) - Inox 304L - 316L
    - 5624 : Té ISO avec manchette (roulé soudé) - Inox 304L - 316L
    List of part numbers


    - 5625 : Té métrique sans manchette (roulé soudé) - Inox 304 L - 316 L

    5625 : Té métrique sans manchette (roulé soudé) - Inox 304 L - 316 L
    - 5625 : Té métrique sans manchette (roulé soudé) - Inox 304 L - 316 L
    List of part numbers


    - 5626 : Té métrique avec manchette (roulé soudé) - Inox 304 L - 316 L

    5626 : Té métrique avec manchette (roulé soudé) - Inox 304 L - 316 L
    - 5626 : Té métrique avec manchette (roulé soudé) - Inox 304 L - 316 L
    List of part numbers


    - 5627 : Fond bombé ISO épaisseur 2 mm - Inox 304 L - 316 L

    5627 : Fond bombé ISO épaisseur 2 mm - Inox 304 L - 316 L
    - 5627 : Fond bombé ISO épaisseur 2 mm - Inox 304 L - 316 L
    List of part numbers


    - 5628 : Fond bombé métrique pour tube mince - épaisseur 2mm Inox 304 L - 316 L

    5628 : Fond bombé métrique pour tube mince - épaisseur 2mm Inox 304 L - 316 L
    - 5628 : Fond bombé métrique pour tube mince - épaisseur 2mm Inox 304 L - 316 L
    List of part numbers


    - 5629 : Collet embouti ISO épaisseur 2 mm - Inox 304L - 316L

    5629 : Collet embouti ISO épaisseur 2 mm - Inox 304L - 316L
    - 5629 : Collet embouti ISO épaisseur 2 mm - Inox 304L - 316L
    List of part numbers


    - 5631 : Collet embouti métrique pour tube mince - Inox 304 L - 316 L

    5631 : Collet embouti métrique pour tube mince - Inox 304 L - 316 L
    - 5631 : Collet embouti métrique pour tube mince - Inox 304 L - 316 L
    List of part numbers


    - 5632 : Collet épais usiné ISO - Inox 304 L - 316 L

    5632 : Collet épais usiné ISO - Inox 304 L - 316 L
    - 5632 : Collet épais usiné ISO - Inox 304 L - 316 L
    List of part numbers


    - 5641 : Té ISO manchette courte - roulé soudé - inox 304 L - 316 L

    5641 : Té ISO manchette courte - roulé soudé - inox 304 L - 316 L
    - 5641 : Té ISO manchette courte - roulé soudé - inox 304 L - 316 L
    List of part numbers


    - 5643 : Té métrique à manchette courte (roulé soudé) - Inox 304 L - 316 L

    5643 : Té métrique à manchette courte (roulé soudé) - Inox 304 L - 316 L
    - 5643 : Té métrique à manchette courte (roulé soudé) - Inox 304 L - 316 L
    List of part numbers


    - 5711 : Bride tournante emboutie DIN 2642 - Inox 304 - 316

    5711 : Bride tournante emboutie DIN 2642 - Inox 304 - 316
    - 5711 : Bride tournante emboutie DIN 2642 - Inox 304 - 316
    List of part numbers


    - 5711a : Bride tournante emboutie DIN 2642 - Acier zingué bichromaté A37

    5711a : Bride tournante emboutie DIN 2642 - Acier zingué bichromaté A37
    - 5711a : Bride tournante emboutie DIN 2642 - Acier zingué bichromaté A37
    List of part numbers


    - 5712 : Bride tournante aluminium AS 13 - alésage type C ISO - PN 10

    5712 : Bride tournante aluminium AS 13 - alésage type C ISO - PN 10
    - 5712 : Bride tournante aluminium AS 13 - alésage type C ISO - PN 10
    List of part numbers


    - 5713 : Bride tournante aluminium AS 13 - alésage type A métrique - PN 10

    5713 : Bride tournante aluminium AS 13 - alésage type A métrique - PN 10
    - 5713 : Bride tournante aluminium AS 13 - alésage type A métrique - PN 10
    List of part numbers


    - 5714 : Bride plate à souder type 01A - PN 10 à PN40 - Inox 304 L - 316 L

    5714 : Bride plate à souder type 01A - PN 10 à PN40 - Inox 304 L - 316 L
    - 5714 : Bride plate à souder type 01A - PN 10 à PN40 - Inox 304 L - 316 L
    List of part numbers


    - 5715 : Bride plate tournante type 02A - PN 10 à PN40 - Inox 304 L - 316 L

    5715 : Bride plate tournante type 02A - PN 10 à PN40 - Inox 304 L - 316 L
    - 5715 : Bride plate tournante type 02A - PN 10 à PN40 - Inox 304 L - 316 L
    List of part numbers


    - 5716 : Bride plate taraudée - Inox 304L - 316L

    5716 : Bride plate taraudée - Inox 304L - 316L
    - 5716 : Bride plate taraudée - Inox 304L - 316L
    List of part numbers


    - 5718 : Tampon plein type 05A - PN 10 à PN40 - Inox 304 L - 316 L

    5718 : Tampon plein type 05A - PN 10 à PN40 - Inox 304 L - 316 L
    - 5718 : Tampon plein type 05A - PN 10 à PN40 - Inox 304 L - 316 L
    List of part numbers


    - 5721 : Bride à collerette à souder type 11B - PN 10 à PN40 - Inox 304 L - 316 L

    5721 : Bride à collerette à souder type 11B - PN 10 à PN40 - Inox 304 L - 316 L
    - 5721 : Bride à collerette à souder type 11B - PN 10 à PN40 - Inox 304 L - 316 L
    List of part numbers


    - 65611 : Boule de lavage - Inox 316

    65611 : Boule de lavage - Inox 316
    - 65611 : Boule de lavage - Inox 316
    List of part numbers


    - 65612 : Boule de lavage avec plat sous collerette - Inox 316

    65612 : Boule de lavage avec plat sous collerette - Inox 316
    - 65612 : Boule de lavage avec plat sous collerette - Inox 316
    List of part numbers


    - 7810 - WITH THREADED FITTING BSPP & METRIC, EXHAUST

    7810 - WITH THREADED FITTING BSPP & METRIC, EXHAUST
    - 7810 - WITH THREADED FITTING BSPP & METRIC, EXHAUST
    List of part numbers


    - 90° Cross with sockets for solvent welding - XIV

    90° Cross with sockets for solvent welding - XIV
    - 90° Cross with sockets for solvent welding - XIV
    List of part numbers


    - 90° Elbow - parallel threaded sockets - GFV

    90° Elbow - parallel threaded sockets - GFV
    - 90° Elbow - parallel threaded sockets - GFV
    List of part numbers


    - 90° Elbow - socket for solvent welding - GLV

    90° Elbow - socket for solvent welding - GLV
    - 90° Elbow - socket for solvent welding - GLV
    List of part numbers


    - 90° Elbow with sockets for solvent welding - GIV

    90° Elbow with sockets for solvent welding - GIV
    - 90° Elbow with sockets for solvent welding - GIV
    List of part numbers


    - 90° Equal Tee - socket for solvent welding - TLV

    90° Equal Tee - socket for solvent welding - TLV
    - 90° Equal Tee - socket for solvent welding - TLV
    List of part numbers


    - 90° Equal Tee with sockets for solvent welding - TIV

    90° Equal Tee with sockets for solvent welding - TIV
    - 90° Equal Tee with sockets for solvent welding - TIV
    List of part numbers


    - 90° Faucet Elbow - d solvent welding socket plain and R, parallel threads - GIFV

    90° Faucet Elbow - d solvent welding socket plain and R, parallel threads - GIFV
    - 90° Faucet Elbow - d solvent welding socket plain and R, parallel threads - GIFV
    List of part numbers


    - 90° Faucet Elbow - solvent welding plain socket d and parallel threaded R - GLFV

    90° Faucet Elbow - solvent welding plain socket d and parallel threaded R - GLFV
    - 90° Faucet Elbow - solvent welding plain socket d and parallel threaded R - GLFV
    List of part numbers


    - 90° Faucet Elbow Reinforced - d solvent welding socket plain and R parallel threaded with reinforcing metal ring - GIMV

    90° Faucet Elbow Reinforced - d solvent welding socket plain and R parallel threaded with reinforcing metal ring - GIMV
    - 90° Faucet Elbow Reinforced - d solvent welding socket plain and R parallel threaded with reinforcing metal ring - GIMV
    List of part numbers


    - 90° Faucet Tee - two solvent welding plain sockets d and one parallel threaded R - TIFV

    90° Faucet Tee - two solvent welding plain sockets d and one parallel threaded R - TIFV
    - 90° Faucet Tee - two solvent welding plain sockets d and one parallel threaded R - TIFV
    List of part numbers


    - 90° FFaucet Tee Reinforced - two solvent welding plain sockets d and one parallel threaded R with reinforcing metal ring - TIMV

    90° FFaucet Tee Reinforced - two solvent welding plain sockets d and one parallel threaded R with reinforcing metal ring - TIMV
    - 90° FFaucet Tee Reinforced - two solvent welding plain sockets d and one parallel threaded R with reinforcing metal ring - TIMV
    List of part numbers


    - 90° Long Radius Bend with sockets for solvent welding - SIV

    90° Long Radius Bend with sockets for solvent welding - SIV
    - 90° Long Radius Bend with sockets for solvent welding - SIV
    List of part numbers


    - 90° Long Radius Bend with sockets for solvent welding - SLV

    90° Long Radius Bend with sockets for solvent welding - SLV
    - 90° Long Radius Bend with sockets for solvent welding - SLV
    List of part numbers


    - 90° Reducing Tee with sockets for solvent welding d - TRIV

    90° Reducing Tee with sockets for solvent welding d - TRIV
    - 90° Reducing Tee with sockets for solvent welding d - TRIV
    List of part numbers


    - 90° Tee - parallel threaded sockets - TFV

    90° Tee - parallel threaded sockets - TFV
    - 90° Tee - parallel threaded sockets - TFV
    List of part numbers


    - 91 - Screw, nut and washers, 5.6 zinc plated steel

    91 - Screw, nut and washers, 5.6 zinc plated steel
    - 91 - Screw, nut and washers, 5.6 zinc plated steel
    List of part numbers


    - A35 Adaptor

    A35 Adaptor
    - A35 Adaptor
    List of part numbers


    - Adaptor between accumulator and safety block

    Adaptor between accumulator and safety block
    - Adaptor between accumulator and safety block
    List of part numbers


    - Adaptor Socket Female/Male - d solvent welding socket and R male end parallel threaded - ILFV

    Adaptor Socket Female/Male - d solvent welding socket and R male end parallel threaded - ILFV
    - Adaptor Socket Female/Male - d solvent welding socket and R male end parallel threaded - ILFV
    List of part numbers


    - AFA - SAE flanges with welding piece

    AFA - SAE flanges with welding piece
    - AFA - SAE flanges with welding piece
    List of part numbers


    - AFE - SAE BSP thread flanges

    AFE - SAE BSP thread flanges
    - AFE - SAE BSP thread flanges
    List of part numbers


    - AFKV - SAE flanges with welding piece

    AFKV - SAE flanges with welding piece
    - AFKV - SAE flanges with welding piece
    List of part numbers


    - AFL - SAE socket weld flanges

    AFL - SAE socket weld flanges
    - AFL - SAE socket weld flanges
    List of part numbers


    - AFLA - SAE socket weld flanges

    AFLA - SAE socket weld flanges
    - AFLA - SAE socket weld flanges
    List of part numbers


    - AFM - SAE connection 24° AVIT- cones

    AFM - SAE connection 24° AVIT- cones
    - AFM - SAE connection 24° AVIT- cones
    List of part numbers


    - AFMW - SAE flange elbow connection 24° AVIT cones

    AFMW - SAE flange elbow connection 24° AVIT cones
    - AFMW - SAE flange elbow connection 24° AVIT cones
    List of part numbers


    - AFS - SAE butt weld flanges

    AFS - SAE butt weld flanges
    - AFS - SAE butt weld flanges
    List of part numbers


    - AFSA - SAE butt weld flanges

    AFSA - SAE butt weld flanges
    - AFSA - SAE butt weld flanges
    List of part numbers


    - AFW - SAE flange elbow butt welding

    AFW - SAE flange elbow butt welding
    - AFW - SAE flange elbow butt welding
    List of part numbers


    - AFWA - SAE elbow connection 24° cone with split flange halves

    AFWA - SAE elbow connection 24° cone with split flange halves
    - AFWA - SAE elbow connection 24° cone with split flange halves
    List of part numbers


    - Back Nut - parallel threads for LIV and LIFV - JFV

    Back Nut - parallel threads for LIV and LIFV - JFV
    - Back Nut - parallel threads for LIV and LIFV - JFV
    List of part numbers


    - Backing Ring - for QGV, QPV, QRV, QFV, QLV stubs - ODV

    Backing Ring - for QGV, QPV, QRV, QFV, QLV stubs - ODV
    - Backing Ring - for QGV, QPV, QRV, QFV, QLV stubs - ODV
    List of part numbers


    - Barrel Nipple - parallel threaded - NFV

    Barrel Nipple - parallel threaded - NFV
    - Barrel Nipple - parallel threaded - NFV
    List of part numbers


    - BIDON STOCKAGE 5L

    BIDON STOCKAGE 5L
    - BIDON STOCKAGE 5L
    List of part numbers


    - Blind flange - PN 10

    Blind flange - PN 10
    - Blind flange - PN 10
    List of part numbers


    - Blind flange - PN 10 - Form A

    Blind flange - PN 10 - Form A
    - Blind flange - PN 10 - Form A
    List of part numbers


    - Blind flange - PN 10 - Form B

    Blind flange - PN 10 - Form B
    - Blind flange - PN 10 - Form B
    List of part numbers


    - Blind flange - PN 10 - Thin - Form A

    Blind flange - PN 10 - Thin - Form A
    - Blind flange - PN 10 - Thin - Form A
    List of part numbers


    - Blind flange - PN 10 - Thin - Form B

    Blind flange - PN 10 - Thin - Form B
    - Blind flange - PN 10 - Thin - Form B
    List of part numbers


    - Blind flange - PN 100

    Blind flange - PN 100
    - Blind flange - PN 100
    List of part numbers


    - Blind flange - PN 100 - Form A

    Blind flange - PN 100 - Form A
    - Blind flange - PN 100 - Form A
    List of part numbers


    - Blind flange - PN 100 - Form B

    Blind flange - PN 100 - Form B
    - Blind flange - PN 100 - Form B
    List of part numbers


    - Blind flange - PN 16

    Blind flange - PN 16
    - Blind flange - PN 16
    List of part numbers


    - Blind flange - PN 16 - Form A

    Blind flange - PN 16 - Form A
    - Blind flange - PN 16 - Form A
    List of part numbers


    - Blind flange - PN 16 - Form B

    Blind flange - PN 16 - Form B
    - Blind flange - PN 16 - Form B
    List of part numbers


    - Blind flange - PN 160 - Form A

    Blind flange - PN 160 - Form A
    - Blind flange - PN 160 - Form A
    List of part numbers


    - Blind flange - PN 160 - Form B

    Blind flange - PN 160 - Form B
    - Blind flange - PN 160 - Form B
    List of part numbers


    - Blind flange - PN 25

    Blind flange - PN 25
    - Blind flange - PN 25
    List of part numbers


    - Blind flange - PN 25 - Form A

    Blind flange - PN 25 - Form A
    - Blind flange - PN 25 - Form A
    List of part numbers


    - Blind flange - PN 25 - Form B

    Blind flange - PN 25 - Form B
    - Blind flange - PN 25 - Form B
    List of part numbers


    - Blind flange - PN 250 - Form A

    Blind flange - PN 250 - Form A
    - Blind flange - PN 250 - Form A
    List of part numbers


    - Blind flange - PN 250 - Form B

    Blind flange - PN 250 - Form B
    - Blind flange - PN 250 - Form B
    List of part numbers


    - Blind flange - PN 40

    Blind flange - PN 40
    - Blind flange - PN 40
    List of part numbers


    - Blind flange - PN 40 - Form A

    Blind flange - PN 40 - Form A
    - Blind flange - PN 40 - Form A
    List of part numbers


    - Blind flange - PN 40 - Form B

    Blind flange - PN 40 - Form B
    - Blind flange - PN 40 - Form B
    List of part numbers


    - Blind flange - PN 6

    Blind flange - PN 6
    - Blind flange - PN 6
    List of part numbers


    - Blind flange - PN 6 - Form A

    Blind flange - PN 6 - Form A
    - Blind flange - PN 6 - Form A
    List of part numbers


    - Blind flange - PN 6 - Form B

    Blind flange - PN 6 - Form B
    - Blind flange - PN 6 - Form B
    List of part numbers


    - Blind flange - PN 64

    Blind flange - PN 64
    - Blind flange - PN 64
    List of part numbers


    - Blind flange - PN 64 - Form A

    Blind flange - PN 64 - Form A
    - Blind flange - PN 64 - Form A
    List of part numbers


    - Blind flange - PN 64 - Form B

    Blind flange - PN 64 - Form B
    - Blind flange - PN 64 - Form B
    List of part numbers


    - Blind Flange - Raised/serrated faces for flat gaskets - FCV

    Blind Flange - Raised/serrated faces for flat gaskets - FCV
    - Blind Flange - Raised/serrated faces for flat gaskets - FCV
    List of part numbers


    - Brass bulkhead coupling ,12 x 12mm comp

    Brass bulkhead coupling ,12 x 12mm comp
    - Brass bulkhead coupling ,12 x 12mm comp
    List of part numbers


    - Brass bulkhead coupling ,4 x 4mm comp

    Brass bulkhead coupling ,4 x 4mm comp
    - Brass bulkhead coupling ,4 x 4mm comp
    List of part numbers


    - Brass bulkhead coupling ,6 x 6mm comp

    Brass bulkhead coupling ,6 x 6mm comp
    - Brass bulkhead coupling ,6 x 6mm comp
    List of part numbers


    - Brass bulkhead coupling ,8 x 8mm comp

    Brass bulkhead coupling ,8 x 8mm comp
    - Brass bulkhead coupling ,8 x 8mm comp
    List of part numbers


    - Brass equal elbow,10 x 10mm comp

    Brass equal elbow,10 x 10mm comp
    - Brass equal elbow,10 x 10mm comp
    List of part numbers


    - Brass equal elbow,12 x 12mm comp

    Brass equal elbow,12 x 12mm comp
    - Brass equal elbow,12 x 12mm comp
    List of part numbers


    - Brass equal elbow,4 x 4mm comp

    Brass equal elbow,4 x 4mm comp
    - Brass equal elbow,4 x 4mm comp
    List of part numbers


    - Brass equal elbow,6 x 6mm comp

    Brass equal elbow,6 x 6mm comp
    - Brass equal elbow,6 x 6mm comp
    List of part numbers


    - Brass equal elbow,8 x 8mm comp

    Brass equal elbow,8 x 8mm comp
    - Brass equal elbow,8 x 8mm comp
    List of part numbers


    - BSP

    BSP
    - BSP
    List of part numbers


    - BUSE COAXIALE GI-A/S SR 300 MM

    BUSE COAXIALE GI-A/S SR 300 MM
    - BUSE COAXIALE GI-A/S SR 300 MM
    List of part numbers


    - Butt welding 180° long radius elbow - Double Extra Strong (X.X.S.)

    Butt welding 180° long radius elbow - Double Extra Strong (X.X.S.)
    - Butt welding 180° long radius elbow - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding 180° long radius elbow - Extra Strong (X.S.)

    Butt welding 180° long radius elbow - Extra Strong (X.S.)
    - Butt welding 180° long radius elbow - Extra Strong (X.S.)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 10 (SCH 10)

    Butt welding 180° long radius elbow - Schedule 10 (SCH 10)
    - Butt welding 180° long radius elbow - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 100 (SCH100)

    Butt welding 180° long radius elbow - Schedule 100 (SCH100)
    - Butt welding 180° long radius elbow - Schedule 100 (SCH100)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 120 (SCH 120)

    Butt welding 180° long radius elbow - Schedule 120 (SCH 120)
    - Butt welding 180° long radius elbow - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 140 (SCH140)

    Butt welding 180° long radius elbow - Schedule 140 (SCH140)
    - Butt welding 180° long radius elbow - Schedule 140 (SCH140)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 160 (SCH 160)

    Butt welding 180° long radius elbow - Schedule 160 (SCH 160)
    - Butt welding 180° long radius elbow - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 20 (SCH20)

    Butt welding 180° long radius elbow - Schedule 20 (SCH20)
    - Butt welding 180° long radius elbow - Schedule 20 (SCH20)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 30 (SCH 30)

    Butt welding 180° long radius elbow - Schedule 30 (SCH 30)
    - Butt welding 180° long radius elbow - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 40 (SCH 40)

    Butt welding 180° long radius elbow - Schedule 40 (SCH 40)
    - Butt welding 180° long radius elbow - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 60 (SCH60)

    Butt welding 180° long radius elbow - Schedule 60 (SCH60)
    - Butt welding 180° long radius elbow - Schedule 60 (SCH60)
    List of part numbers


    - Butt welding 180° long radius elbow - Schedule 80 (SCH 80)

    Butt welding 180° long radius elbow - Schedule 80 (SCH 80)
    - Butt welding 180° long radius elbow - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding 180° long radius elbow - Stainless steel (SCH 10S)

    Butt welding 180° long radius elbow - Stainless steel (SCH 10S)
    - Butt welding 180° long radius elbow - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding 180° long radius elbow - Stainless steel (SCH 40S)

    Butt welding 180° long radius elbow - Stainless steel (SCH 40S)
    - Butt welding 180° long radius elbow - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding 180° long radius elbow - Stainless steel (SCH 5S)

    Butt welding 180° long radius elbow - Stainless steel (SCH 5S)
    - Butt welding 180° long radius elbow - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding 180° long radius elbow - Stainless steel (SCH 80S)

    Butt welding 180° long radius elbow - Stainless steel (SCH 80S)
    - Butt welding 180° long radius elbow - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding 180° long radius elbow - Standard (STD)

    Butt welding 180° long radius elbow - Standard (STD)
    - Butt welding 180° long radius elbow - Standard (STD)
    List of part numbers


    - Butt welding 180° short radius elbow - Double Extra Strong (X.X.S.)

    Butt welding 180° short radius elbow - Double Extra Strong (X.X.S.)
    - Butt welding 180° short radius elbow - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding 180° short radius elbow - Extra Strong (X.S)

    Butt welding 180° short radius elbow - Extra Strong (X.S)
    - Butt welding 180° short radius elbow - Extra Strong (X.S)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 10 (SCH 10)

    Butt welding 180° short radius elbow - Schedule 10 (SCH 10)
    - Butt welding 180° short radius elbow - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 100 (SCH 100)

    Butt welding 180° short radius elbow - Schedule 100 (SCH 100)
    - Butt welding 180° short radius elbow - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 120 (SCH 120)

    Butt welding 180° short radius elbow - Schedule 120 (SCH 120)
    - Butt welding 180° short radius elbow - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 140 (SCH 140)

    Butt welding 180° short radius elbow - Schedule 140 (SCH 140)
    - Butt welding 180° short radius elbow - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 160 (SCH 160)

    Butt welding 180° short radius elbow - Schedule 160 (SCH 160)
    - Butt welding 180° short radius elbow - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 20 (SCH 20)

    Butt welding 180° short radius elbow - Schedule 20 (SCH 20)
    - Butt welding 180° short radius elbow - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 30 (SCH 30)

    Butt welding 180° short radius elbow - Schedule 30 (SCH 30)
    - Butt welding 180° short radius elbow - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 40 (SCH 40)

    Butt welding 180° short radius elbow - Schedule 40 (SCH 40)
    - Butt welding 180° short radius elbow - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 60 (SCH 60)

    Butt welding 180° short radius elbow - Schedule 60 (SCH 60)
    - Butt welding 180° short radius elbow - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding 180° short radius elbow - Schedule 80 (SCH 80)

    Butt welding 180° short radius elbow - Schedule 80 (SCH 80)
    - Butt welding 180° short radius elbow - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding 180° short radius elbow - Stainless steel (SCH 10S)

    Butt welding 180° short radius elbow - Stainless steel (SCH 10S)
    - Butt welding 180° short radius elbow - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding 180° short radius elbow - Stainless steel (SCH 40S)

    Butt welding 180° short radius elbow - Stainless steel (SCH 40S)
    - Butt welding 180° short radius elbow - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding 180° short radius elbow - Stainless steel (SCH 5S)

    Butt welding 180° short radius elbow - Stainless steel (SCH 5S)
    - Butt welding 180° short radius elbow - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding 180° short radius elbow - Stainless steel (SCH 80S)

    Butt welding 180° short radius elbow - Stainless steel (SCH 80S)
    - Butt welding 180° short radius elbow - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding 180° short radius elbow - Standard (STD)

    Butt welding 180° short radius elbow - Standard (STD)
    - Butt welding 180° short radius elbow - Standard (STD)
    List of part numbers


    - Butt welding 45° long radius elbow - Double Extra Strong (X.X.S.)

    Butt welding 45° long radius elbow - Double Extra Strong (X.X.S.)
    - Butt welding 45° long radius elbow - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding 45° long radius elbow - Extra Strong (X.S.)

    Butt welding 45° long radius elbow - Extra Strong (X.S.)
    - Butt welding 45° long radius elbow - Extra Strong (X.S.)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 10 (SCH 10)

    Butt welding 45° long radius elbow - Schedule 10 (SCH 10)
    - Butt welding 45° long radius elbow - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 100 (SCH 100)

    Butt welding 45° long radius elbow - Schedule 100 (SCH 100)
    - Butt welding 45° long radius elbow - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 120 (SCH 120)

    Butt welding 45° long radius elbow - Schedule 120 (SCH 120)
    - Butt welding 45° long radius elbow - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 140 (SCH 140)

    Butt welding 45° long radius elbow - Schedule 140 (SCH 140)
    - Butt welding 45° long radius elbow - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 160 (SCH 160)

    Butt welding 45° long radius elbow - Schedule 160 (SCH 160)
    - Butt welding 45° long radius elbow - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 20 (SCH 20)

    Butt welding 45° long radius elbow - Schedule 20 (SCH 20)
    - Butt welding 45° long radius elbow - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 30 (SCH 30)

    Butt welding 45° long radius elbow - Schedule 30 (SCH 30)
    - Butt welding 45° long radius elbow - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 40 (SCH 40)

    Butt welding 45° long radius elbow - Schedule 40 (SCH 40)
    - Butt welding 45° long radius elbow - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 60 (SCH 60)

    Butt welding 45° long radius elbow - Schedule 60 (SCH 60)
    - Butt welding 45° long radius elbow - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding 45° long radius elbow - Schedule 80 (SCH 80)

    Butt welding 45° long radius elbow - Schedule 80 (SCH 80)
    - Butt welding 45° long radius elbow - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding 45° long radius elbow - Stainless steel (SCH 10S)

    Butt welding 45° long radius elbow - Stainless steel (SCH 10S)
    - Butt welding 45° long radius elbow - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding 45° long radius elbow - Stainless steel (SCH 40S)

    Butt welding 45° long radius elbow - Stainless steel (SCH 40S)
    - Butt welding 45° long radius elbow - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding 45° long radius elbow - Stainless steel (SCH 5S)

    Butt welding 45° long radius elbow - Stainless steel (SCH 5S)
    - Butt welding 45° long radius elbow - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding 45° long radius elbow - Stainless steel (SCH 80S)

    Butt welding 45° long radius elbow - Stainless steel (SCH 80S)
    - Butt welding 45° long radius elbow - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding 45° long radius elbow - Standard (STD)

    Butt welding 45° long radius elbow - Standard (STD)
    - Butt welding 45° long radius elbow - Standard (STD)
    List of part numbers


    - Butt welding 90° long radius elbow - Double Extra Strong (X.X.S.)

    Butt welding 90° long radius elbow - Double Extra Strong (X.X.S.)
    - Butt welding 90° long radius elbow - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding 90° long radius elbow - Extra Strong (X.S.)

    Butt welding 90° long radius elbow - Extra Strong (X.S.)
    - Butt welding 90° long radius elbow - Extra Strong (X.S.)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 10 (SCH10)

    Butt welding 90° long radius elbow - Schedule 10 (SCH10)
    - Butt welding 90° long radius elbow - Schedule 10 (SCH10)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 100 (SCH 100)

    Butt welding 90° long radius elbow - Schedule 100 (SCH 100)
    - Butt welding 90° long radius elbow - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 120 (SCH 120)

    Butt welding 90° long radius elbow - Schedule 120 (SCH 120)
    - Butt welding 90° long radius elbow - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 140 (SCH 140)

    Butt welding 90° long radius elbow - Schedule 140 (SCH 140)
    - Butt welding 90° long radius elbow - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 160 (SCH 160)

    Butt welding 90° long radius elbow - Schedule 160 (SCH 160)
    - Butt welding 90° long radius elbow - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 20 (SCH20)

    Butt welding 90° long radius elbow - Schedule 20 (SCH20)
    - Butt welding 90° long radius elbow - Schedule 20 (SCH20)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 30 (SCH30)

    Butt welding 90° long radius elbow - Schedule 30 (SCH30)
    - Butt welding 90° long radius elbow - Schedule 30 (SCH30)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 40 (SCH 40)

    Butt welding 90° long radius elbow - Schedule 40 (SCH 40)
    - Butt welding 90° long radius elbow - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 60 (SCH 60)

    Butt welding 90° long radius elbow - Schedule 60 (SCH 60)
    - Butt welding 90° long radius elbow - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding 90° long radius elbow - Schedule 80 (SCH 80)

    Butt welding 90° long radius elbow - Schedule 80 (SCH 80)
    - Butt welding 90° long radius elbow - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding 90° long radius elbow - Stainless steel (SCH 10S)

    Butt welding 90° long radius elbow - Stainless steel (SCH 10S)
    - Butt welding 90° long radius elbow - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding 90° long radius elbow - Stainless steel (SCH 40S)

    Butt welding 90° long radius elbow - Stainless steel (SCH 40S)
    - Butt welding 90° long radius elbow - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding 90° long radius elbow - Stainless steel (SCH 5S)

    Butt welding 90° long radius elbow - Stainless steel (SCH 5S)
    - Butt welding 90° long radius elbow - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding 90° long radius elbow - Stainless steel (SCH 80S)

    Butt welding 90° long radius elbow - Stainless steel (SCH 80S)
    - Butt welding 90° long radius elbow - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding 90° long radius elbow - Standard (STD)

    Butt welding 90° long radius elbow - Standard (STD)
    - Butt welding 90° long radius elbow - Standard (STD)
    List of part numbers


    - Butt welding 90° short radius elbow - Double Extra Strong (X.X.S.)

    Butt welding 90° short radius elbow - Double Extra Strong (X.X.S.)
    - Butt welding 90° short radius elbow - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding 90° short radius elbow - Extra Strong (X.S.)

    Butt welding 90° short radius elbow - Extra Strong (X.S.)
    - Butt welding 90° short radius elbow - Extra Strong (X.S.)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 10 (SCH 10)

    Butt welding 90° short radius elbow - Schedule 10 (SCH 10)
    - Butt welding 90° short radius elbow - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 100 (SCH 100)

    Butt welding 90° short radius elbow - Schedule 100 (SCH 100)
    - Butt welding 90° short radius elbow - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 120 (SCH 120)

    Butt welding 90° short radius elbow - Schedule 120 (SCH 120)
    - Butt welding 90° short radius elbow - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 140 (SCH 140)

    Butt welding 90° short radius elbow - Schedule 140 (SCH 140)
    - Butt welding 90° short radius elbow - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 160 (SCH 160)

    Butt welding 90° short radius elbow - Schedule 160 (SCH 160)
    - Butt welding 90° short radius elbow - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 20 (SCH 20)

    Butt welding 90° short radius elbow - Schedule 20 (SCH 20)
    - Butt welding 90° short radius elbow - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 30 (SCH 30)

    Butt welding 90° short radius elbow - Schedule 30 (SCH 30)
    - Butt welding 90° short radius elbow - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 40 (SCH 40)

    Butt welding 90° short radius elbow - Schedule 40 (SCH 40)
    - Butt welding 90° short radius elbow - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 60 (SCH 60)

    Butt welding 90° short radius elbow - Schedule 60 (SCH 60)
    - Butt welding 90° short radius elbow - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding 90° short radius elbow - Schedule 80 (SCH 80)

    Butt welding 90° short radius elbow - Schedule 80 (SCH 80)
    - Butt welding 90° short radius elbow - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding 90° short radius elbow - Stainless steel (SCH 10S)

    Butt welding 90° short radius elbow - Stainless steel (SCH 10S)
    - Butt welding 90° short radius elbow - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding 90° short radius elbow - Stainless steel (SCH 40S)

    Butt welding 90° short radius elbow - Stainless steel (SCH 40S)
    - Butt welding 90° short radius elbow - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding 90° short radius elbow - Stainless steel (SCH 5S)

    Butt welding 90° short radius elbow - Stainless steel (SCH 5S)
    - Butt welding 90° short radius elbow - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding 90° short radius elbow - Stainless steel (SCH 80S)

    Butt welding 90° short radius elbow - Stainless steel (SCH 80S)
    - Butt welding 90° short radius elbow - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding 90° short radius elbow - Standard (STD)

    Butt welding 90° short radius elbow - Standard (STD)
    - Butt welding 90° short radius elbow - Standard (STD)
    List of part numbers


    - Butt welding cap - Double Extra Strong (X.X.S.)

    Butt welding cap - Double Extra Strong (X.X.S.)
    - Butt welding cap - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding cap - Extra Strong (X.S.)

    Butt welding cap - Extra Strong (X.S.)
    - Butt welding cap - Extra Strong (X.S.)
    List of part numbers


    - Butt welding cap - Schedule 100 (SCH 100)

    Butt welding cap - Schedule 100 (SCH 100)
    - Butt welding cap - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding cap - Schedule 120 (SCH 120)

    Butt welding cap - Schedule 120 (SCH 120)
    - Butt welding cap - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding cap - Schedule 140 (SCH 140)

    Butt welding cap - Schedule 140 (SCH 140)
    - Butt welding cap - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding cap - Schedule 160 (SCH 160)

    Butt welding cap - Schedule 160 (SCH 160)
    - Butt welding cap - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding cap - Schedule 20 (SCH 20)

    Butt welding cap - Schedule 20 (SCH 20)
    - Butt welding cap - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding cap - Schedule 30 (SCH 30)

    Butt welding cap - Schedule 30 (SCH 30)
    - Butt welding cap - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding cap - Schedule 40 (SCH40)

    Butt welding cap - Schedule 40 (SCH40)
    - Butt welding cap - Schedule 40 (SCH40)
    List of part numbers


    - Butt welding cap - Schedule 60 (SCH 60)

    Butt welding cap - Schedule 60 (SCH 60)
    - Butt welding cap - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding cap - Schedule 80 (SCH 80)

    Butt welding cap - Schedule 80 (SCH 80)
    - Butt welding cap - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding cap - Schedule10 (SCH 10)

    Butt welding cap - Schedule10 (SCH 10)
    - Butt welding cap - Schedule10 (SCH 10)
    List of part numbers


    - Butt welding cap - Stainless steel (SCH 10S)

    Butt welding cap - Stainless steel (SCH 10S)
    - Butt welding cap - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding cap - Stainless steel (SCH 40S)

    Butt welding cap - Stainless steel (SCH 40S)
    - Butt welding cap - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding cap - Stainless steel (SCH 5S)

    Butt welding cap - Stainless steel (SCH 5S)
    - Butt welding cap - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding cap - Stainless steel (SCH 80S)

    Butt welding cap - Stainless steel (SCH 80S)
    - Butt welding cap - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding cap - Standard (STD)

    Butt welding cap - Standard (STD)
    - Butt welding cap - Standard (STD)
    List of part numbers


    - Butt welding concentric reducer - Double Extra Strong (X.X.S.)

    Butt welding concentric reducer - Double Extra Strong (X.X.S.)
    - Butt welding concentric reducer - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding concentric reducer - Extra Strong (X.S.)

    Butt welding concentric reducer - Extra Strong (X.S.)
    - Butt welding concentric reducer - Extra Strong (X.S.)
    List of part numbers


    - Butt welding concentric reducer - Schedule 10 (SCH 10)

    Butt welding concentric reducer - Schedule 10 (SCH 10)
    - Butt welding concentric reducer - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding concentric reducer - Schedule 100 (SCH 100)

    Butt welding concentric reducer - Schedule 100 (SCH 100)
    - Butt welding concentric reducer - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding concentric reducer - Schedule 120 (SCH 120)

    Butt welding concentric reducer - Schedule 120 (SCH 120)
    - Butt welding concentric reducer - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding concentric reducer - Schedule 140 (SCH 140)

    Butt welding concentric reducer - Schedule 140 (SCH 140)
    - Butt welding concentric reducer - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding concentric reducer - Schedule 160 (SCH 160)

    Butt welding concentric reducer - Schedule 160 (SCH 160)
    - Butt welding concentric reducer - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding concentric reducer - Schedule 20 (SCH 20)

    Butt welding concentric reducer - Schedule 20 (SCH 20)
    - Butt welding concentric reducer - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding concentric reducer - Schedule 30 (SCH 30)

    Butt welding concentric reducer - Schedule 30 (SCH 30)
    - Butt welding concentric reducer - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding concentric reducer - Schedule 40 (SCH 40)

    Butt welding concentric reducer - Schedule 40 (SCH 40)
    - Butt welding concentric reducer - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding concentric reducer - Schedule 60 (SCH 60)

    Butt welding concentric reducer - Schedule 60 (SCH 60)
    - Butt welding concentric reducer - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding concentric reducer - Schedule 80 (SCH 80)

    Butt welding concentric reducer - Schedule 80 (SCH 80)
    - Butt welding concentric reducer - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding concentric reducer - Stainless steel (SCH 10S)

    Butt welding concentric reducer - Stainless steel (SCH 10S)
    - Butt welding concentric reducer - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding concentric reducer - Stainless steel (SCH 40S)

    Butt welding concentric reducer - Stainless steel (SCH 40S)
    - Butt welding concentric reducer - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding concentric reducer - Stainless steel (SCH 5S)

    Butt welding concentric reducer - Stainless steel (SCH 5S)
    - Butt welding concentric reducer - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding concentric reducer - Stainless steel (SCH 80S)

    Butt welding concentric reducer - Stainless steel (SCH 80S)
    - Butt welding concentric reducer - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding concentric reducer - Standard (STD)

    Butt welding concentric reducer - Standard (STD)
    - Butt welding concentric reducer - Standard (STD)
    List of part numbers


    - Butt welding reducing outlet tee - Double Extra Strong (X.X.S.)

    Butt welding reducing outlet tee - Double Extra Strong (X.X.S.)
    - Butt welding reducing outlet tee - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding reducing outlet tee - Extra Strong (X.S.)

    Butt welding reducing outlet tee - Extra Strong (X.S.)
    - Butt welding reducing outlet tee - Extra Strong (X.S.)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 10 (SCH 10)

    Butt welding reducing outlet tee - Schedule 10 (SCH 10)
    - Butt welding reducing outlet tee - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 100 (SCH 100)

    Butt welding reducing outlet tee - Schedule 100 (SCH 100)
    - Butt welding reducing outlet tee - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 120 (SCH 120)

    Butt welding reducing outlet tee - Schedule 120 (SCH 120)
    - Butt welding reducing outlet tee - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 140 (SCH 140)

    Butt welding reducing outlet tee - Schedule 140 (SCH 140)
    - Butt welding reducing outlet tee - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 160 (SCH 160)

    Butt welding reducing outlet tee - Schedule 160 (SCH 160)
    - Butt welding reducing outlet tee - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 20 (SCH 20)

    Butt welding reducing outlet tee - Schedule 20 (SCH 20)
    - Butt welding reducing outlet tee - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 30 (SCH 30)

    Butt welding reducing outlet tee - Schedule 30 (SCH 30)
    - Butt welding reducing outlet tee - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 40 (SCH 40)

    Butt welding reducing outlet tee - Schedule 40 (SCH 40)
    - Butt welding reducing outlet tee - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 60 (SCH 60)

    Butt welding reducing outlet tee - Schedule 60 (SCH 60)
    - Butt welding reducing outlet tee - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding reducing outlet tee - Schedule 80 (SCH 80)

    Butt welding reducing outlet tee - Schedule 80 (SCH 80)
    - Butt welding reducing outlet tee - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding reducing outlet tee - Stainless steel (SCH 10S)

    Butt welding reducing outlet tee - Stainless steel (SCH 10S)
    - Butt welding reducing outlet tee - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding reducing outlet tee - Stainless steel (SCH 40S)

    Butt welding reducing outlet tee - Stainless steel (SCH 40S)
    - Butt welding reducing outlet tee - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding reducing outlet tee - Stainless steel (SCH 5S)

    Butt welding reducing outlet tee - Stainless steel (SCH 5S)
    - Butt welding reducing outlet tee - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding reducing outlet tee - Stainless steel (SCH 80S)

    Butt welding reducing outlet tee - Stainless steel (SCH 80S)
    - Butt welding reducing outlet tee - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding reducing outlet tee - Standard (STD)

    Butt welding reducing outlet tee - Standard (STD)
    - Butt welding reducing outlet tee - Standard (STD)
    List of part numbers


    - Butt welding straight tee - Double Extra Strong (X.X.S.)

    Butt welding straight tee - Double Extra Strong (X.X.S.)
    - Butt welding straight tee - Double Extra Strong (X.X.S.)
    List of part numbers


    - Butt welding straight tee - Extra Strong (X.S.)

    Butt welding straight tee - Extra Strong (X.S.)
    - Butt welding straight tee - Extra Strong (X.S.)
    List of part numbers


    - Butt welding straight tee - Schedule 10 (SCH 10)

    Butt welding straight tee - Schedule 10 (SCH 10)
    - Butt welding straight tee - Schedule 10 (SCH 10)
    List of part numbers


    - Butt welding straight tee - Schedule 100 (SCH 100)

    Butt welding straight tee - Schedule 100 (SCH 100)
    - Butt welding straight tee - Schedule 100 (SCH 100)
    List of part numbers


    - Butt welding straight tee - Schedule 120 (SCH 120)

    Butt welding straight tee - Schedule 120 (SCH 120)
    - Butt welding straight tee - Schedule 120 (SCH 120)
    List of part numbers


    - Butt welding straight tee - Schedule 140 (SCH 140)

    Butt welding straight tee - Schedule 140 (SCH 140)
    - Butt welding straight tee - Schedule 140 (SCH 140)
    List of part numbers


    - Butt welding straight tee - Schedule 160 (SCH 160)

    Butt welding straight tee - Schedule 160 (SCH 160)
    - Butt welding straight tee - Schedule 160 (SCH 160)
    List of part numbers


    - Butt welding straight tee - Schedule 20 (SCH 20)

    Butt welding straight tee - Schedule 20 (SCH 20)
    - Butt welding straight tee - Schedule 20 (SCH 20)
    List of part numbers


    - Butt welding straight tee - Schedule 30 (SCH 30)

    Butt welding straight tee - Schedule 30 (SCH 30)
    - Butt welding straight tee - Schedule 30 (SCH 30)
    List of part numbers


    - Butt welding straight tee - Schedule 40 (SCH 40)

    Butt welding straight tee - Schedule 40 (SCH 40)
    - Butt welding straight tee - Schedule 40 (SCH 40)
    List of part numbers


    - Butt welding straight tee - Schedule 60 (SCH 60)

    Butt welding straight tee - Schedule 60 (SCH 60)
    - Butt welding straight tee - Schedule 60 (SCH 60)
    List of part numbers


    - Butt welding straight tee - Schedule 80 (SCH 80)

    Butt welding straight tee - Schedule 80 (SCH 80)
    - Butt welding straight tee - Schedule 80 (SCH 80)
    List of part numbers


    - Butt welding straight tee - Stainless steel (SCH 10S)

    Butt welding straight tee - Stainless steel (SCH 10S)
    - Butt welding straight tee - Stainless steel (SCH 10S)
    List of part numbers


    - Butt welding straight tee - Stainless steel (SCH 40S)

    Butt welding straight tee - Stainless steel (SCH 40S)
    - Butt welding straight tee - Stainless steel (SCH 40S)
    List of part numbers


    - Butt welding straight tee - Stainless steel (SCH 5S)

    Butt welding straight tee - Stainless steel (SCH 5S)
    - Butt welding straight tee - Stainless steel (SCH 5S)
    List of part numbers


    - Butt welding straight tee - Stainless steel (SCH 80S)

    Butt welding straight tee - Stainless steel (SCH 80S)
    - Butt welding straight tee - Stainless steel (SCH 80S)
    List of part numbers


    - Butt welding straight tee - Standard (STD)

    Butt welding straight tee - Standard (STD)
    - Butt welding straight tee - Standard (STD)
    List of part numbers


    - Class 150 flanges - lapped

    Class 150 flanges - lapped
    - Class 150 flanges - lapped
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 24 - Blind

    Class 150 flanges - NPS 1/2 to 24 - Blind
    - Class 150 flanges - NPS 1/2 to 24 - Blind
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 24 - Long welding neck

    Class 150 flanges - NPS 1/2 to 24 - Long welding neck
    - Class 150 flanges - NPS 1/2 to 24 - Long welding neck
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 24 - Slip on

    Class 150 flanges - NPS 1/2 to 24 - Slip on
    - Class 150 flanges - NPS 1/2 to 24 - Slip on
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 24 - Threaded

    Class 150 flanges - NPS 1/2 to 24 - Threaded
    - Class 150 flanges - NPS 1/2 to 24 - Threaded
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 24 - Welding neck

    Class 150 flanges - NPS 1/2 to 24 - Welding neck
    - Class 150 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 150 flanges - NPS 1/2 to 3 - Socket welding

    Class 150 flanges - NPS 1/2 to 3 - Socket welding
    - Class 150 flanges - NPS 1/2 to 3 - Socket welding
    List of part numbers


    - Class 150 flanges - NPS 26 to 48 - Slip on

    Class 150 flanges - NPS 26 to 48 - Slip on
    - Class 150 flanges - NPS 26 to 48 - Slip on
    List of part numbers


    - Class 150 flanges - NPS 26 to 48 - Welding neck

    Class 150 flanges - NPS 26 to 48 - Welding neck
    - Class 150 flanges - NPS 26 to 48 - Welding neck
    List of part numbers


    - Class 150 flanges - NPS 26 to 60 - Blind - serie A

    Class 150 flanges - NPS 26 to 60 - Blind - serie A
    - Class 150 flanges - NPS 26 to 60 - Blind - serie A
    List of part numbers


    - Class 150 flanges - NPS 26 to 60 - Blind - serie B

    Class 150 flanges - NPS 26 to 60 - Blind - serie B
    - Class 150 flanges - NPS 26 to 60 - Blind - serie B
    List of part numbers


    - Class 150 flanges - NPS 26 to 60 - Welding neck - serie A

    Class 150 flanges - NPS 26 to 60 - Welding neck - serie A
    - Class 150 flanges - NPS 26 to 60 - Welding neck - serie A
    List of part numbers


    - Class 150 flanges - NPS 26 to 60 - Welding neck - serie B

    Class 150 flanges - NPS 26 to 60 - Welding neck - serie B
    - Class 150 flanges - NPS 26 to 60 - Welding neck - serie B
    List of part numbers


    - Class 1500 flanges - NPS 1 to 24 - Orifice welding neck

    Class 1500 flanges - NPS 1 to 24 - Orifice welding neck
    - Class 1500 flanges - NPS 1 to 24 - Orifice welding neck
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 2 1/2 - Socket welding

    Class 1500 flanges - NPS 1/2 to 2 1/2 - Socket welding
    - Class 1500 flanges - NPS 1/2 to 2 1/2 - Socket welding
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 2 1/2 - Threaded

    Class 1500 flanges - NPS 1/2 to 2 1/2 - Threaded
    - Class 1500 flanges - NPS 1/2 to 2 1/2 - Threaded
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 24 - Blind

    Class 1500 flanges - NPS 1/2 to 24 - Blind
    - Class 1500 flanges - NPS 1/2 to 24 - Blind
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 24 - Lapped

    Class 1500 flanges - NPS 1/2 to 24 - Lapped
    - Class 1500 flanges - NPS 1/2 to 24 - Lapped
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 24 - Slip on

    Class 1500 flanges - NPS 1/2 to 24 - Slip on
    - Class 1500 flanges - NPS 1/2 to 24 - Slip on
    List of part numbers


    - Class 1500 flanges - NPS 1/2 to 24 - Welding neck

    Class 1500 flanges - NPS 1/2 to 24 - Welding neck
    - Class 1500 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 2500 flanges - NPS 1 to 12 - Orifice welding neck

    Class 2500 flanges - NPS 1 to 12 - Orifice welding neck
    - Class 2500 flanges - NPS 1 to 12 - Orifice welding neck
    List of part numbers


    - Class 2500 flanges - NPS 1/2 to 12 - Blind

    Class 2500 flanges - NPS 1/2 to 12 - Blind
    - Class 2500 flanges - NPS 1/2 to 12 - Blind
    List of part numbers


    - Class 2500 flanges - NPS 1/2 to 12 - Threaded

    Class 2500 flanges - NPS 1/2 to 12 - Threaded
    - Class 2500 flanges - NPS 1/2 to 12 - Threaded
    List of part numbers


    - Class 2500 flanges - NPS 1/2 to 24 - Lapped

    Class 2500 flanges - NPS 1/2 to 24 - Lapped
    - Class 2500 flanges - NPS 1/2 to 24 - Lapped
    List of part numbers


    - Class 2500 flanges - NPS 1/2 to 24 - Welding neck

    Class 2500 flanges - NPS 1/2 to 24 - Welding neck
    - Class 2500 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 300 flanges - NPS 1 to 24 - Orifice slip on

    Class 300 flanges - NPS 1 to 24 - Orifice slip on
    - Class 300 flanges - NPS 1 to 24 - Orifice slip on
    List of part numbers


    - Class 300 flanges - NPS 1 to 24 - Orifice welding neck

    Class 300 flanges - NPS 1 to 24 - Orifice welding neck
    - Class 300 flanges - NPS 1 to 24 - Orifice welding neck
    List of part numbers


    - Class 300 flanges - NPS 1 to 8 - Orifice threaded

    Class 300 flanges - NPS 1 to 8 - Orifice threaded
    - Class 300 flanges - NPS 1 to 8 - Orifice threaded
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Blind

    Class 300 flanges - NPS 1/2 to 24 - Blind
    - Class 300 flanges - NPS 1/2 to 24 - Blind
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Lapped

    Class 300 flanges - NPS 1/2 to 24 - Lapped
    - Class 300 flanges - NPS 1/2 to 24 - Lapped
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Long welding neck

    Class 300 flanges - NPS 1/2 to 24 - Long welding neck
    - Class 300 flanges - NPS 1/2 to 24 - Long welding neck
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Slip on

    Class 300 flanges - NPS 1/2 to 24 - Slip on
    - Class 300 flanges - NPS 1/2 to 24 - Slip on
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Threaded

    Class 300 flanges - NPS 1/2 to 24 - Threaded
    - Class 300 flanges - NPS 1/2 to 24 - Threaded
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 24 - Welding neck

    Class 300 flanges - NPS 1/2 to 24 - Welding neck
    - Class 300 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 300 flanges - NPS 1/2 to 3 - Socket welding

    Class 300 flanges - NPS 1/2 to 3 - Socket welding
    - Class 300 flanges - NPS 1/2 to 3 - Socket welding
    List of part numbers


    - Class 300 flanges - NPS 26 to 36 - Slip on

    Class 300 flanges - NPS 26 to 36 - Slip on
    - Class 300 flanges - NPS 26 to 36 - Slip on
    List of part numbers


    - Class 300 flanges - NPS 26 to 36 - Welding neck

    Class 300 flanges - NPS 26 to 36 - Welding neck
    - Class 300 flanges - NPS 26 to 36 - Welding neck
    List of part numbers


    - Class 300 flanges - NPS 26 to 60 - Blind - serie A

    Class 300 flanges - NPS 26 to 60 - Blind - serie A
    - Class 300 flanges - NPS 26 to 60 - Blind - serie A
    List of part numbers


    - Class 300 flanges - NPS 26 to 60 - Blind - serie B

    Class 300 flanges - NPS 26 to 60 - Blind - serie B
    - Class 300 flanges - NPS 26 to 60 - Blind - serie B
    List of part numbers


    - Class 300 flanges - NPS 26 to 60 - Welding neck - serie A

    Class 300 flanges - NPS 26 to 60 - Welding neck - serie A
    - Class 300 flanges - NPS 26 to 60 - Welding neck - serie A
    List of part numbers


    - Class 300 flanges - NPS 26 to 60 - Welding neck - serie B

    Class 300 flanges - NPS 26 to 60 - Welding neck - serie B
    - Class 300 flanges - NPS 26 to 60 - Welding neck - serie B
    List of part numbers


    - Class 400 flanges - NPS 1 to 24 -Orifice welding neck

    Class 400 flanges - NPS 1 to 24 -Orifice welding neck
    - Class 400 flanges - NPS 1 to 24 -Orifice welding neck
    List of part numbers


    - Class 400 flanges - NPS 1/2 to 24 - Threaded

    Class 400 flanges - NPS 1/2 to 24 - Threaded
    - Class 400 flanges - NPS 1/2 to 24 - Threaded
    List of part numbers


    - Class 400 flanges - NPS 26 to 36 - Slip on

    Class 400 flanges - NPS 26 to 36 - Slip on
    - Class 400 flanges - NPS 26 to 36 - Slip on
    List of part numbers


    - Class 400 flanges - NPS 26 to 36 - Welding neck

    Class 400 flanges - NPS 26 to 36 - Welding neck
    - Class 400 flanges - NPS 26 to 36 - Welding neck
    List of part numbers


    - Class 400 flanges - NPS 26 to 60 - Blind

    Class 400 flanges - NPS 26 to 60 - Blind
    - Class 400 flanges - NPS 26 to 60 - Blind
    List of part numbers


    - Class 400 flanges - NPS 26 to 60 - Blind - serie B

    Class 400 flanges - NPS 26 to 60 - Blind - serie B
    - Class 400 flanges - NPS 26 to 60 - Blind - serie B
    List of part numbers


    - Class 400 flanges - NPS 26 to 60 - Welding neck - serie A

    Class 400 flanges - NPS 26 to 60 - Welding neck - serie A
    - Class 400 flanges - NPS 26 to 60 - Welding neck - serie A
    List of part numbers


    - Class 400 flanges - NPS 4 to 24 - Blind

    Class 400 flanges - NPS 4 to 24 - Blind
    - Class 400 flanges - NPS 4 to 24 - Blind
    List of part numbers


    - Class 400 flanges - NPS 4 to 24 - lapped

    Class 400 flanges - NPS 4 to 24 - lapped
    - Class 400 flanges - NPS 4 to 24 - lapped
    List of part numbers


    - Class 400 flanges - NPS 4 to 24 - Slip on

    Class 400 flanges - NPS 4 to 24 - Slip on
    - Class 400 flanges - NPS 4 to 24 - Slip on
    List of part numbers


    - Class 400 flanges - NPS 4 to 24 - Welding neck

    Class 400 flanges - NPS 4 to 24 - Welding neck
    - Class 400 flanges - NPS 4 to 24 - Welding neck
    List of part numbers


    - Class 600 flanges - NPS 1 to 24 - Orifice welding neck

    Class 600 flanges - NPS 1 to 24 - Orifice welding neck
    - Class 600 flanges - NPS 1 to 24 - Orifice welding neck
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - Blind

    Class 600 flanges - NPS 1/2 to 24 - Blind
    - Class 600 flanges - NPS 1/2 to 24 - Blind
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - lapped

    Class 600 flanges - NPS 1/2 to 24 - lapped
    - Class 600 flanges - NPS 1/2 to 24 - lapped
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - Long welding neck

    Class 600 flanges - NPS 1/2 to 24 - Long welding neck
    - Class 600 flanges - NPS 1/2 to 24 - Long welding neck
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - Slip on

    Class 600 flanges - NPS 1/2 to 24 - Slip on
    - Class 600 flanges - NPS 1/2 to 24 - Slip on
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - Threaded

    Class 600 flanges - NPS 1/2 to 24 - Threaded
    - Class 600 flanges - NPS 1/2 to 24 - Threaded
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 24 - Welding neck

    Class 600 flanges - NPS 1/2 to 24 - Welding neck
    - Class 600 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 600 flanges - NPS 1/2 to 3 - Socket welding

    Class 600 flanges - NPS 1/2 to 3 - Socket welding
    - Class 600 flanges - NPS 1/2 to 3 - Socket welding
    List of part numbers


    - Class 600 flanges - NPS 26 to 36 - Slip on

    Class 600 flanges - NPS 26 to 36 - Slip on
    - Class 600 flanges - NPS 26 to 36 - Slip on
    List of part numbers


    - Class 600 flanges - NPS 26 to 36 - Welding neck

    Class 600 flanges - NPS 26 to 36 - Welding neck
    - Class 600 flanges - NPS 26 to 36 - Welding neck
    List of part numbers


    - Class 600 flanges - NPS 26 to 60 - Blind - serie A

    Class 600 flanges - NPS 26 to 60 - Blind - serie A
    - Class 600 flanges - NPS 26 to 60 - Blind - serie A
    List of part numbers


    - Class 600 flanges - NPS 26 to 60 - Blind - serie B

    Class 600 flanges - NPS 26 to 60 - Blind - serie B
    - Class 600 flanges - NPS 26 to 60 - Blind - serie B
    List of part numbers


    - Class 600 flanges - NPS 26 to 60 - Welding neck - serie A

    Class 600 flanges - NPS 26 to 60 - Welding neck - serie A
    - Class 600 flanges - NPS 26 to 60 - Welding neck - serie A
    List of part numbers


    - Class 600 flanges - NPS 26 to 60 - Welding neck - serie B

    Class 600 flanges - NPS 26 to 60 - Welding neck - serie B
    - Class 600 flanges - NPS 26 to 60 - Welding neck - serie B
    List of part numbers


    - Class 900 flanges - NPS 1 to 24 - Orifice welding neck

    Class 900 flanges - NPS 1 to 24 - Orifice welding neck
    - Class 900 flanges - NPS 1 to 24 - Orifice welding neck
    List of part numbers


    - Class 900 flanges - NPS 1/2 to 24 - Long welding neck

    Class 900 flanges - NPS 1/2 to 24 - Long welding neck
    - Class 900 flanges - NPS 1/2 to 24 - Long welding neck
    List of part numbers


    - Class 900 flanges - NPS 1/2 to 24 - Threaded

    Class 900 flanges - NPS 1/2 to 24 - Threaded
    - Class 900 flanges - NPS 1/2 to 24 - Threaded
    List of part numbers


    - Class 900 flanges - NPS 1/2 to 24 - Welding neck

    Class 900 flanges - NPS 1/2 to 24 - Welding neck
    - Class 900 flanges - NPS 1/2 to 24 - Welding neck
    List of part numbers


    - Class 900 flanges - NPS 26 to 48 - Blind - serie A

    Class 900 flanges - NPS 26 to 48 - Blind - serie A
    - Class 900 flanges - NPS 26 to 48 - Blind - serie A
    List of part numbers


    - Class 900 flanges - NPS 26 to 48 - Blind - serie B

    Class 900 flanges - NPS 26 to 48 - Blind - serie B
    - Class 900 flanges - NPS 26 to 48 - Blind - serie B
    List of part numbers


    - Class 900 flanges - NPS 26 to 48 - Welding neck - serie A

    Class 900 flanges - NPS 26 to 48 - Welding neck - serie A
    - Class 900 flanges - NPS 26 to 48 - Welding neck - serie A
    List of part numbers


    - Class 900 flanges - NPS 26 to 48 - Welding neck - serie B

    Class 900 flanges - NPS 26 to 48 - Welding neck - serie B
    - Class 900 flanges - NPS 26 to 48 - Welding neck - serie B
    List of part numbers


    - Class 900 flanges - NPS 3 to 24 - Blind

    Class 900 flanges - NPS 3 to 24 - Blind
    - Class 900 flanges - NPS 3 to 24 - Blind
    List of part numbers


    - Class 900 flanges - NPS 3 to 24 - lapped

    Class 900 flanges - NPS 3 to 24 - lapped
    - Class 900 flanges - NPS 3 to 24 - lapped
    List of part numbers


    - Class 900 flanges - NPS 3 to 24 - Slip on

    Class 900 flanges - NPS 3 to 24 - Slip on
    - Class 900 flanges - NPS 3 to 24 - Slip on
    List of part numbers


    - CVDE - PE end connectors long spigot

    CVDE - PE end connectors long spigot
    - CVDE - PE end connectors long spigot
    List of part numbers


    - CVDE - PE end connectors long spigot

    CVDE - PE end connectors long spigot
    - CVDE - PE end connectors long spigot
    List of part numbers


    - DESCENTE DE LINGE

    DESCENTE DE LINGE
    - DESCENTE DE LINGE
    List of part numbers


    - DFA - Welding neck flanges DIN 2633 - PN 16

    DFA - Welding neck flanges DIN 2633 - PN 16
    - DFA - Welding neck flanges DIN 2633 - PN 16
    List of part numbers


    - DFK - Welding neck flanges DIN 2633 - PN 16

    DFK - Welding neck flanges DIN 2633 - PN 16
    - DFK - Welding neck flanges DIN 2633 - PN 16
    List of part numbers


    - DIFLUX - UNIFLUX - DINAFLUX

    DIFLUX - UNIFLUX - DINAFLUX
    - DIFLUX - UNIFLUX - DINAFLUX
    List of part numbers


    - DINAGAS 3CE

    DINAGAS 3CE
    - DINAGAS 3CE
    List of part numbers


    - DINAK DP

    DINAK DP
    - DINAK DP
    List of part numbers


    - DINAK DP+

    DINAK DP+
    - DINAK DP+
    List of part numbers


    - DINAK DW / DINAC C

    DINAK DW / DINAC C
    - DINAK DW / DINAC C
    List of part numbers


    - DINAK GE

    DINAK GE
    - DINAK GE
    List of part numbers


    - DIPAN

    DIPAN
    - DIPAN
    List of part numbers


    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded - DIFV

    Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded - DIFV
    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded - DIFV
    List of part numbers


    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded with reinforcing metal ring - DIMV

    Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded with reinforcing metal ring - DIMV
    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R female parallel threaded with reinforcing metal ring - DIMV
    List of part numbers


    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R male threaded - KIFV

    Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R male threaded - KIFV
    - Double male/female Adaptor Socket, df socket for solvent welding, dm spigot for solvent welding, R male threaded - KIFV
    List of part numbers


    - Double Socket - d solvent welding socket and R parallel threaded socket female - MIFV

    Double Socket - d solvent welding socket and R parallel threaded socket female - MIFV
    - Double Socket - d solvent welding socket and R parallel threaded socket female - MIFV
    List of part numbers


    - Double Socket - parallel threaded sockets - MFV

    Double Socket - parallel threaded sockets - MFV
    - Double Socket - parallel threaded sockets - MFV
    List of part numbers


    - Double Socket - sockets for solvent welding - MLV

    Double Socket - sockets for solvent welding - MLV
    - Double Socket - sockets for solvent welding - MLV
    List of part numbers


    - Double Socket for solvent welding - MIV

    Double Socket for solvent welding - MIV
    - Double Socket for solvent welding - MIV
    List of part numbers


    - Double Socket mm/inch - both ends plain, d for solvent welding to metric pipe, d - MILV

    Double Socket mm/inch - both ends plain, d for solvent welding to metric pipe, d - MILV
    - Double Socket mm/inch - both ends plain, d for solvent welding to metric pipe, d - MILV
    List of part numbers


    - Double Socket Reducing for solvent welding with d - MRIV

    Double Socket Reducing for solvent welding with d - MRIV
    - Double Socket Reducing for solvent welding with d - MRIV
    List of part numbers


    - Double Socket Reinforced - d solvent welding socket and R parallel threaded with reinforcing metal ring - MIMV

    Double Socket Reinforced - d solvent welding socket and R parallel threaded with reinforcing metal ring - MIMV
    - Double Socket Reinforced - d solvent welding socket and R parallel threaded with reinforcing metal ring - MIMV
    List of part numbers


    - Einpressbuchse

    Einpressbuchse
    - Einpressbuchse
    List of part numbers


    - End Cap - parallel threaded socket - CFV

    End Cap - parallel threaded socket - CFV
    - End Cap - parallel threaded socket - CFV
    List of part numbers


    - End Cap - socket for solvent welding - CLV

    End Cap - socket for solvent welding - CLV
    - End Cap - socket for solvent welding - CLV
    List of part numbers


    - End Cap socket for solvent welding - CIV

    End Cap socket for solvent welding - CIV
    - End Cap socket for solvent welding - CIV
    List of part numbers


    - Equal straight coupler,10 x 10mm comp

    Equal straight coupler,10 x 10mm comp
    - Equal straight coupler,10 x 10mm comp
    List of part numbers


    - Equal straight coupling,12 x 12mm comp

    Equal straight coupling,12 x 12mm comp
    - Equal straight coupling,12 x 12mm comp
    List of part numbers


    - Equal straight coupling,4 x 4mm comp

    Equal straight coupling,4 x 4mm comp
    - Equal straight coupling,4 x 4mm comp
    List of part numbers


    - Equal straight coupling,6 x 6mm comp

    Equal straight coupling,6 x 6mm comp
    - Equal straight coupling,6 x 6mm comp
    List of part numbers


    - Equal straight coupling,8 x 8mm comp

    Equal straight coupling,8 x 8mm comp
    - Equal straight coupling,8 x 8mm comp
    List of part numbers


    - EVA. 14 - EVA flat gasket (D400 / D500: EPDM), Metric series

    EVA. 14 - EVA flat gasket (D400 / D500: EPDM), Metric series
    - EVA. 14 - EVA flat gasket (D400 / D500: EPDM), Metric series
    List of part numbers


    - FA - Flanges - PN 10-64 / series 0

    FA - Flanges - PN 10-64 / series 0
    - FA - Flanges - PN 10-64 / series 0
    List of part numbers


    - FA - Flanges - PN 160 / series 2

    FA - Flanges - PN 160 / series 2
    - FA - Flanges - PN 160 / series 2
    List of part numbers


    - FA - Flanges - PN 250 / series 3

    FA - Flanges - PN 250 / series 3
    - FA - Flanges - PN 250 / series 3
    List of part numbers


    - FA - Flanges - PN 315 / series 4

    FA - Flanges - PN 315 / series 4
    - FA - Flanges - PN 315 / series 4
    List of part numbers


    - FA - Flanges - PN 400 / series 5

    FA - Flanges - PN 400 / series 5
    - FA - Flanges - PN 400 / series 5
    List of part numbers


    - FA - Flanges - PN 500 / series 6

    FA - Flanges - PN 500 / series 6
    - FA - Flanges - PN 500 / series 6
    List of part numbers


    - Female/Male Reducer - R female parallel threaded, R reduced male threaded - IFFV

    Female/Male Reducer - R female parallel threaded, R reduced male threaded - IFFV
    - Female/Male Reducer - R female parallel threaded, R reduced male threaded - IFFV
    List of part numbers


    - FFA - Flanges - PN 250 / series 3

    FFA - Flanges - PN 250 / series 3
    - FFA - Flanges - PN 250 / series 3
    List of part numbers


    - FFA - Flanges - PN 400 / series 5

    FFA - Flanges - PN 400 / series 5
    - FFA - Flanges - PN 400 / series 5
    List of part numbers


    - FFK - Flanges - PN 250 / series 3

    FFK - Flanges - PN 250 / series 3
    - FFK - Flanges - PN 250 / series 3
    List of part numbers


    - FFK - Flanges - PN 400 / series 5

    FFK - Flanges - PN 400 / series 5
    - FFK - Flanges - PN 400 / series 5
    List of part numbers


    - FINITIONS DESIGN

    FINITIONS DESIGN
    - FINITIONS DESIGN
    List of part numbers


    - Fittings Mod. 1050

    Fittings Mod. 1050
    - Fittings Mod. 1050
    List of part numbers


    - Fittings Mod. 1063

    Fittings Mod. 1063
    - Fittings Mod. 1063
    List of part numbers


    - Fittings Mod. 6432

    Fittings Mod. 6432
    - Fittings Mod. 6432
    List of part numbers


    - Fittings Mod. 6512

    Fittings Mod. 6512
    - Fittings Mod. 6512
    List of part numbers


    - Fittings Mod. 6522

    Fittings Mod. 6522
    - Fittings Mod. 6522
    List of part numbers


    - FK - Flanges - PN 10-64 / series 0

    FK - Flanges - PN 10-64 / series 0
    - FK - Flanges - PN 10-64 / series 0
    List of part numbers


    - FK - Flanges - PN 160 / series 2

    FK - Flanges - PN 160 / series 2
    - FK - Flanges - PN 160 / series 2
    List of part numbers


    - FK - Flanges - PN 250 / series 3

    FK - Flanges - PN 250 / series 3
    - FK - Flanges - PN 250 / series 3
    List of part numbers


    - FK - Flanges - PN 315 / series 4

    FK - Flanges - PN 315 / series 4
    - FK - Flanges - PN 315 / series 4
    List of part numbers


    - FK - Flanges - PN 400 / series 5

    FK - Flanges - PN 400 / series 5
    - FK - Flanges - PN 400 / series 5
    List of part numbers


    - FK - Flanges - PN 500 / series 6

    FK - Flanges - PN 500 / series 6
    - FK - Flanges - PN 500 / series 6
    List of part numbers


    - Flat flange for welding - PN 10

    Flat flange for welding - PN 10
    - Flat flange for welding - PN 10
    List of part numbers


    - Flat oval flange - Lyonnaise series - PN 6

    Flat oval flange - Lyonnaise series - PN 6
    - Flat oval flange - Lyonnaise series - PN 6
    List of part numbers


    - Flat Stub - sockets for solvent welding flat faces for companion stubs QGV for gaskets QHV - QLV

    Flat Stub - sockets for solvent welding flat faces for companion stubs QGV for gaskets QHV - QLV
    - Flat Stub - sockets for solvent welding flat faces for companion stubs QGV for gaskets QHV - QLV
    List of part numbers


    - Flat Stub - solvent welding sockets, flat faces for companion QGV stubs - QPV

    Flat Stub - solvent welding sockets, flat faces for companion QGV stubs - QPV
    - Flat Stub - solvent welding sockets, flat faces for companion QGV stubs - QPV
    List of part numbers


    - Flat threaded oval flange - PN 10/16

    Flat threaded oval flange - PN 10/16
    - Flat threaded oval flange - PN 10/16
    List of part numbers


    - Flat threaded oval flange - PN 6

    Flat threaded oval flange - PN 6
    - Flat threaded oval flange - PN 6
    List of part numbers


    - FLC hose diameter 13 mm

    FLC hose diameter 13 mm
    - FLC hose diameter 13 mm
    List of part numbers


    - FLC hose diameter 16 mm

    FLC hose diameter 16 mm
    - FLC hose diameter 16 mm
    List of part numbers


    - FLC hose diameter 19 mm

    FLC hose diameter 19 mm
    - FLC hose diameter 19 mm
    List of part numbers


    - FLC hose diameter 25 mm

    FLC hose diameter 25 mm
    - FLC hose diameter 25 mm
    List of part numbers


    - FLCD hose diameter 13 mm

    FLCD hose diameter 13 mm
    - FLCD hose diameter 13 mm
    List of part numbers


    - FLCD hose diameter 16 mm

    FLCD hose diameter 16 mm
    - FLCD hose diameter 16 mm
    List of part numbers


    - FLCD hose diameter 19 mm

    FLCD hose diameter 19 mm
    - FLCD hose diameter 19 mm
    List of part numbers


    - FLCD hose diameter 25 mm

    FLCD hose diameter 25 mm
    - FLCD hose diameter 25 mm
    List of part numbers


    - FLD hose diameter 13 mm

    FLD hose diameter 13 mm
    - FLD hose diameter 13 mm
    List of part numbers


    - FLD hose diameter 16 mm

    FLD hose diameter 16 mm
    - FLD hose diameter 16 mm
    List of part numbers


    - FLD hose diameter 19 mm

    FLD hose diameter 19 mm
    - FLD hose diameter 19 mm
    List of part numbers


    - FLD hose diameter 25 mm

    FLD hose diameter 25 mm
    - FLD hose diameter 25 mm
    List of part numbers


    - FULL KONTACT

    FULL KONTACT
    - FULL KONTACT
    List of part numbers


    - FV - Flange distributors

    FV - Flange distributors
    - FV - Flange distributors
    List of part numbers


    - Gelenk einstellbar

    Gelenk einstellbar
    - Gelenk einstellbar
    List of part numbers


    - Gelenk fest

    Gelenk fest
    - Gelenk fest
    List of part numbers


    - GN 7490 Welded bushings, Type A without collar

    GN 7490 Welded bushings, Type A without collar
    - GN 7490 Welded bushings, Type A without collar
    List of part numbers


    - GN 7490 Welded bushings, Type B with collar

    GN 7490 Welded bushings, Type B with collar
    - GN 7490 Welded bushings, Type B with collar
    List of part numbers


    - GN 991 Tube end plugs, Diameter

    GN 991 Tube end plugs, Diameter
    - GN 991 Tube end plugs, Diameter
    List of part numbers


    - GN 991 Tube end plugs, Square

    GN 991 Tube end plugs, Square
    - GN 991 Tube end plugs, Square
    List of part numbers


    - GN 992 Threaded tube inserts, round

    GN 992 Threaded tube inserts, round
    - GN 992 Threaded tube inserts, round
    List of part numbers


    - GN 992 Threaded tube inserts, square

    GN 992 Threaded tube inserts, square
    - GN 992 Threaded tube inserts, square
    List of part numbers


    - Hubbed slip-on flange for welding - PN 10

    Hubbed slip-on flange for welding - PN 10
    - Hubbed slip-on flange for welding - PN 10
    List of part numbers


    - Hubbed slip-on flange for welding - PN 16

    Hubbed slip-on flange for welding - PN 16
    - Hubbed slip-on flange for welding - PN 16
    List of part numbers


    - Hubbed slip-on flange for welding - PN 25

    Hubbed slip-on flange for welding - PN 25
    - Hubbed slip-on flange for welding - PN 25
    List of part numbers


    - Hubbed slip-on flange for welding - PN 6

    Hubbed slip-on flange for welding - PN 6
    - Hubbed slip-on flange for welding - PN 6
    List of part numbers


    - Hubbed threaded flange - PN 10

    Hubbed threaded flange - PN 10
    - Hubbed threaded flange - PN 10
    List of part numbers


    - Hubbed threaded flange - PN 16

    Hubbed threaded flange - PN 16
    - Hubbed threaded flange - PN 16
    List of part numbers


    - Hubbed threaded flange - PN 25

    Hubbed threaded flange - PN 25
    - Hubbed threaded flange - PN 25
    List of part numbers


    - Hubbed threaded flange - PN 6

    Hubbed threaded flange - PN 6
    - Hubbed threaded flange - PN 6
    List of part numbers


    - ISS abdichtend mit Sechskantkopf

    ISS abdichtend mit Sechskantkopf
    - ISS abdichtend mit Sechskantkopf
    List of part numbers


    - ISS Flachkopf

    ISS Flachkopf
    - ISS Flachkopf
    List of part numbers


    - ISS Sechskantkopf

    ISS Sechskantkopf
    - ISS Sechskantkopf
    List of part numbers


    - KOR - Welded reductions

    KOR - Welded reductions
    - KOR - Welded reductions
    List of part numbers


    - Lapped collar

    Lapped collar
    - Lapped collar
    List of part numbers


    - Lapped flange - PN 10

    Lapped flange - PN 10
    - Lapped flange - PN 10
    List of part numbers


    - Lapped flange - PN 25

    Lapped flange - PN 25
    - Lapped flange - PN 25
    List of part numbers


    - Lapped flange - PN 40

    Lapped flange - PN 40
    - Lapped flange - PN 40
    List of part numbers


    - Lapped flange - PN 6

    Lapped flange - PN 6
    - Lapped flange - PN 6
    List of part numbers


    - Loose plate flange PN 10

    Loose plate flange PN 10
    - Loose plate flange PN 10
    List of part numbers


    - Loose plate flange PN 10 - naval construction

    Loose plate flange PN 10 - naval construction
    - Loose plate flange PN 10 - naval construction
    List of part numbers


    - Loose plate flange PN 16

    Loose plate flange PN 16
    - Loose plate flange PN 16
    List of part numbers


    - Loose plate flange PN 16 - naval construction

    Loose plate flange PN 16 - naval construction
    - Loose plate flange PN 16 - naval construction
    List of part numbers


    - Loose plate flange PN 2.5 - naval construction

    Loose plate flange PN 2.5 - naval construction
    - Loose plate flange PN 2.5 - naval construction
    List of part numbers


    - Loose plate flange PN 25

    Loose plate flange PN 25
    - Loose plate flange PN 25
    List of part numbers


    - Loose plate flange PN 40

    Loose plate flange PN 40
    - Loose plate flange PN 40
    List of part numbers


    - Loose plate flange PN 6

    Loose plate flange PN 6
    - Loose plate flange PN 6
    List of part numbers


    - Loose plate flange PN 6 - naval construction

    Loose plate flange PN 6 - naval construction
    - Loose plate flange PN 6 - naval construction
    List of part numbers


    - Lose flange and ring with neck for welding - PN 10

    Lose flange and ring with neck for welding - PN 10
    - Lose flange and ring with neck for welding - PN 10
    List of part numbers


    - Male stud coupling,1/2in BSPPMx12mm comp

    Male stud coupling,1/2in BSPPMx12mm comp
    - Male stud coupling,1/2in BSPPMx12mm comp
    List of part numbers


    - Male stud coupling,1/2in BSPPMx15mm comp

    Male stud coupling,1/2in BSPPMx15mm comp
    - Male stud coupling,1/2in BSPPMx15mm comp
    List of part numbers


    - Male stud coupling,1/2in BSPPMx16mm comp

    Male stud coupling,1/2in BSPPMx16mm comp
    - Male stud coupling,1/2in BSPPMx16mm comp
    List of part numbers


    - Male stud coupling,1/2in BSPTMx10mm comp

    Male stud coupling,1/2in BSPTMx10mm comp
    - Male stud coupling,1/2in BSPTMx10mm comp
    List of part numbers


    - Male stud coupling,1/2in BSPTMx12mm comp

    Male stud coupling,1/2in BSPTMx12mm comp
    - Male stud coupling,1/2in BSPTMx12mm comp
    List of part numbers


    - Male stud coupling,1/2in BSPTMx15mm comp

    Male stud coupling,1/2in BSPTMx15mm comp
    - Male stud coupling,1/2in BSPTMx15mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPP Mx6mm comp

    Male stud coupling,1/4in BSPP Mx6mm comp
    - Male stud coupling,1/4in BSPP Mx6mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPP Mx8mm comp

    Male stud coupling,1/4in BSPP Mx8mm comp
    - Male stud coupling,1/4in BSPP Mx8mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPTMx10mm comp

    Male stud coupling,1/4in BSPTMx10mm comp
    - Male stud coupling,1/4in BSPTMx10mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPTMx12mm comp

    Male stud coupling,1/4in BSPTMx12mm comp
    - Male stud coupling,1/4in BSPTMx12mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPTMx6mm comp

    Male stud coupling,1/4in BSPTMx6mm comp
    - Male stud coupling,1/4in BSPTMx6mm comp
    List of part numbers


    - Male stud coupling,1/4in BSPTMx8mm comp

    Male stud coupling,1/4in BSPTMx8mm comp
    - Male stud coupling,1/4in BSPTMx8mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPP Mx4mm comp

    Male stud coupling,1/8in BSPP Mx4mm comp
    - Male stud coupling,1/8in BSPP Mx4mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPP Mx6mm comp

    Male stud coupling,1/8in BSPP Mx6mm comp
    - Male stud coupling,1/8in BSPP Mx6mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPP Mx8mm comp

    Male stud coupling,1/8in BSPP Mx8mm comp
    - Male stud coupling,1/8in BSPP Mx8mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPT Mx8mm comp

    Male stud coupling,1/8in BSPT Mx8mm comp
    - Male stud coupling,1/8in BSPT Mx8mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPTMx4mm comp

    Male stud coupling,1/8in BSPTMx4mm comp
    - Male stud coupling,1/8in BSPTMx4mm comp
    List of part numbers


    - Male stud coupling,1/8in BSPTMx6mm comp

    Male stud coupling,1/8in BSPTMx6mm comp
    - Male stud coupling,1/8in BSPTMx6mm comp
    List of part numbers


    - Male stud coupling,3/8in BSPTMx10mm comp

    Male stud coupling,3/8in BSPTMx10mm comp
    - Male stud coupling,3/8in BSPTMx10mm comp
    List of part numbers


    - Male stud coupling,3/8in BSPTMx12mm comp

    Male stud coupling,3/8in BSPTMx12mm comp
    - Male stud coupling,3/8in BSPTMx12mm comp
    List of part numbers


    - Male stud elbow,1/2in BSPT M x 12mm comp

    Male stud elbow,1/2in BSPT M x 12mm comp
    - Male stud elbow,1/2in BSPT M x 12mm comp
    List of part numbers


    - Male stud elbow,1/2in BSPT M x 16mm comp

    Male stud elbow,1/2in BSPT M x 16mm comp
    - Male stud elbow,1/2in BSPT M x 16mm comp
    List of part numbers


    - Male stud elbow,1/4in BSPT M x 10mm comp

    Male stud elbow,1/4in BSPT M x 10mm comp
    - Male stud elbow,1/4in BSPT M x 10mm comp
    List of part numbers


    - Male stud elbow,1/4in BSPT M x 12mm comp

    Male stud elbow,1/4in BSPT M x 12mm comp
    - Male stud elbow,1/4in BSPT M x 12mm comp
    List of part numbers


    - Male stud elbow,1/4in BSPT M x 4mm comp

    Male stud elbow,1/4in BSPT M x 4mm comp
    - Male stud elbow,1/4in BSPT M x 4mm comp
    List of part numbers


    - Male stud elbow,1/4in BSPT M x 6mm comp

    Male stud elbow,1/4in BSPT M x 6mm comp
    - Male stud elbow,1/4in BSPT M x 6mm comp
    List of part numbers


    - Male stud elbow,1/4in BSPT M x 8mm comp

    Male stud elbow,1/4in BSPT M x 8mm comp
    - Male stud elbow,1/4in BSPT M x 8mm comp
    List of part numbers


    - Male stud elbow,1/8in BSPT M x 4mm comp

    Male stud elbow,1/8in BSPT M x 4mm comp
    - Male stud elbow,1/8in BSPT M x 4mm comp
    List of part numbers


    - Male stud elbow,1/8in BSPT M x 6mm comp

    Male stud elbow,1/8in BSPT M x 6mm comp
    - Male stud elbow,1/8in BSPT M x 6mm comp
    List of part numbers


    - Male stud elbow,1/8in BSPT M x 8mm comp

    Male stud elbow,1/8in BSPT M x 8mm comp
    - Male stud elbow,1/8in BSPT M x 8mm comp
    List of part numbers


    - Male stud elbow,3/8in BSPT M x 12mm comp

    Male stud elbow,3/8in BSPT M x 12mm comp
    - Male stud elbow,3/8in BSPT M x 12mm comp
    List of part numbers


    - Male stud elbow,3/8in BSPT M x 8mm comp

    Male stud elbow,3/8in BSPT M x 8mm comp
    - Male stud elbow,3/8in BSPT M x 8mm comp
    List of part numbers


    - NPT - High Pressure

    NPT - High Pressure
    - NPT - High Pressure
    List of part numbers


    - NPT - Medium Pressure

    NPT - Medium Pressure
    - NPT - Medium Pressure
    List of part numbers


    - O-Ring Stub - solvent welding sockets with seat for O-Ring gaskets, for backing rings ODV and use with stub QPV - QGV

    O-Ring Stub - solvent welding sockets with seat for O-Ring gaskets, for backing rings ODV and use with stub QPV - QGV
    - O-Ring Stub - solvent welding sockets with seat for O-Ring gaskets, for backing rings ODV and use with stub QPV - QGV
    List of part numbers


    - Oval flange, with neck threaded - PN 10 and PN 16

    Oval flange, with neck threaded - PN 10 and PN 16
    - Oval flange, with neck threaded - PN 10 and PN 16
    List of part numbers


    - Oval flange, with neck threaded - PN 6

    Oval flange, with neck threaded - PN 6
    - Oval flange, with neck threaded - PN 6
    List of part numbers


    - PA. 26. FLG - PA flange (backing ring)

    PA. 26. FLG - PA flange (backing ring)
    - PA. 26. FLG - PA flange (backing ring)
    List of part numbers


    - Parallel Threaded Nut - EFV

    Parallel Threaded Nut - EFV
    - Parallel Threaded Nut - EFV
    List of part numbers


    - PE. 01. BW11 - 90° Elbow - long type, Butt welding SDR 11 / PN16

    PE. 01. BW11 - 90° Elbow - long type, Butt welding SDR 11 / PN16
    - PE. 01. BW11 - 90° Elbow - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 01. BW17 - 90° Elbow - long type, Butt welding SDR 17 / PN10

    PE. 01. BW17 - 90° Elbow - long type, Butt welding SDR 17 / PN10
    - PE. 01. BW17 - 90° Elbow - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 01. EF - 90° Elbow, Electrofusion

    PE. 01. EF - 90° Elbow, Electrofusion
    - PE. 01. EF - 90° Elbow, Electrofusion
    List of part numbers


    - PE. 02. BW11 - 45° Elbow - long type, Butt welding SDR 11 / PN16

    PE. 02. BW11 - 45° Elbow - long type, Butt welding SDR 11 / PN16
    - PE. 02. BW11 - 45° Elbow - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 02. BW17 - 45° Elbow - long type, Butt welding SDR 17 / PN10

    PE. 02. BW17 - 45° Elbow - long type, Butt welding SDR 17 / PN10
    - PE. 02. BW17 - 45° Elbow - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 02. EF - 45° Elbow, Electrofusion

    PE. 02. EF - 45° Elbow, Electrofusion
    - PE. 02. EF - 45° Elbow, Electrofusion
    List of part numbers


    - PE. 03. BW11 - 90° Tee - long type, Butt welding SDR 11 / PN16

    PE. 03. BW11 - 90° Tee - long type, Butt welding SDR 11 / PN16
    - PE. 03. BW11 - 90° Tee - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 03. BW17 - 90° Tee - long type, Butt welding SDR 17 / PN10

    PE. 03. BW17 - 90° Tee - long type, Butt welding SDR 17 / PN10
    - PE. 03. BW17 - 90° Tee - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 03. EF - 90° Tee, Electrofusion

    PE. 03. EF - 90° Tee, Electrofusion
    - PE. 03. EF - 90° Tee, Electrofusion
    List of part numbers


    - PE. 04. BW11 - 90° Reducing tee - long type, Butt welding SDR 11 / PN16

    PE. 04. BW11 - 90° Reducing tee - long type, Butt welding SDR 11 / PN16
    - PE. 04. BW11 - 90° Reducing tee - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 04. BW17 - 90° Reducing tee - long type, Butt welding SDR 17 / PN10

    PE. 04. BW17 - 90° Reducing tee - long type, Butt welding SDR 17 / PN10
    - PE. 04. BW17 - 90° Reducing tee - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 05. EF - Socket, Electrofusion

    PE. 05. EF - Socket, Electrofusion
    - PE. 05. EF - Socket, Electrofusion
    List of part numbers


    - PE. 07. BW11 - Cap - long type, Butt welding SDR 11 / PN16

    PE. 07. BW11 - Cap - long type, Butt welding SDR 11 / PN16
    - PE. 07. BW11 - Cap - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 07. BW17 - Cap - long type, Butt welding SDR 17 / PN10

    PE. 07. BW17 - Cap - long type, Butt welding SDR 17 / PN10
    - PE. 07. BW17 - Cap - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 07. EF - Cap, Electrofusion

    PE. 07. EF - Cap, Electrofusion
    - PE. 07. EF - Cap, Electrofusion
    List of part numbers


    - PE. 09. BW11 - Reducing bush - long type, Butt welding SDR 11 / PN16

    PE. 09. BW11 - Reducing bush - long type, Butt welding SDR 11 / PN16
    - PE. 09. BW11 - Reducing bush - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 09. BW17 - Reducing bush - long type, Butt welding SDR 17 / PN10

    PE. 09. BW17 - Reducing bush - long type, Butt welding SDR 17 / PN10
    - PE. 09. BW17 - Reducing bush - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 09. EF - Reducer, Electrofusion

    PE. 09. EF - Reducer, Electrofusion
    - PE. 09. EF - Reducer, Electrofusion
    List of part numbers


    - PE. 10. BW11 - Flange adaptor - long type, Butt welding SDR 11 / PN16

    PE. 10. BW11 - Flange adaptor - long type, Butt welding SDR 11 / PN16
    - PE. 10. BW11 - Flange adaptor - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 10. BW17 - Flange adaptor - long type, Butt welding SDR 17 / PN10

    PE. 10. BW17 - Flange adaptor - long type, Butt welding SDR 17 / PN10
    - PE. 10. BW17 - Flange adaptor - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 12. FLG - PP backing flange, For PE flange adaptor

    PE. 12. FLG - PP backing flange, For PE flange adaptor
    - PE. 12. FLG - PP backing flange, For PE flange adaptor
    List of part numbers


    - PE. 21. BW11 - End connector for Industrial & Standard Ball Valve Series, PE 100, SDR 11

    PE. 21. BW11 - End connector for Industrial & Standard Ball Valve Series, PE 100, SDR 11
    - PE. 21. BW11 - End connector for Industrial & Standard Ball Valve Series, PE 100, SDR 11
    List of part numbers


    - PE. 36. BW11 - 45° Tee - long type, Butt welding SDR 11 / PN16

    PE. 36. BW11 - 45° Tee - long type, Butt welding SDR 11 / PN16
    - PE. 36. BW11 - 45° Tee - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 38. BW11 - 30° Elbow - long type, Butt welding SDR 11 / PN16

    PE. 38. BW11 - 30° Elbow - long type, Butt welding SDR 11 / PN16
    - PE. 38. BW11 - 30° Elbow - long type, Butt welding SDR 11 / PN16
    List of part numbers


    - PE. 38. BW17 - 30° Elbow - long type, Butt welding SDR 17 / PN10

    PE. 38. BW17 - 30° Elbow - long type, Butt welding SDR 17 / PN10
    - PE. 38. BW17 - 30° Elbow - long type, Butt welding SDR 17 / PN10
    List of part numbers


    - PE. 39. BW11FT - PE Union / stainless steel, Butt welding SDR 11 x BSP female thread

    PE. 39. BW11FT - PE Union / stainless steel, Butt welding SDR 11 x BSP female thread
    - PE. 39. BW11FT - PE Union / stainless steel, Butt welding SDR 11 x BSP female thread
    List of part numbers


    - PE. 39. BW11MT - PE Union / stainless steel, Butt welding SDR 11 x BSP male thread

    PE. 39. BW11MT - PE Union / stainless steel, Butt welding SDR 11 x BSP male thread
    - PE. 39. BW11MT - PE Union / stainless steel, Butt welding SDR 11 x BSP male thread
    List of part numbers


    - PE. 39. EFFT - PE/stainless steel union, Electrofusion x BSP female thread

    PE. 39. EFFT - PE/stainless steel union, Electrofusion x BSP female thread
    - PE. 39. EFFT - PE/stainless steel union, Electrofusion x BSP female thread
    List of part numbers


    - PE. 39. EFMT - PE/stainless steel union, Electrofusion x BSP male thread

    PE. 39. EFMT - PE/stainless steel union, Electrofusion x BSP male thread
    - PE. 39. EFMT - PE/stainless steel union, Electrofusion x BSP male thread
    List of part numbers


    - PE. 40. S11 - EPDM Flat gasket, For PE flange adaptor / SDR 11

    PE. 40. S11 - EPDM Flat gasket, For PE flange adaptor / SDR 11
    - PE. 40. S11 - EPDM Flat gasket, For PE flange adaptor / SDR 11
    List of part numbers


    - PE. 40. S17 - EPDM Flat gasket, For PE flange adaptor / SDR 17

    PE. 40. S17 - EPDM Flat gasket, For PE flange adaptor / SDR 17
    - PE. 40. S17 - EPDM Flat gasket, For PE flange adaptor / SDR 17
    List of part numbers


    - PE. 50. BW11 - PE Union, Butt welding SDR 11

    PE. 50. BW11 - PE Union, Butt welding SDR 11
    - PE. 50. BW11 - PE Union, Butt welding SDR 11
    List of part numbers


    - PE. 53. EF - Clamp saddle, Electrofusion

    PE. 53. EF - Clamp saddle, Electrofusion
    - PE. 53. EF - Clamp saddle, Electrofusion
    List of part numbers


    - PE. 80. BW11 - PE ball valve, PE 100, SDR 11, Seating joints in NBR, O-Rings in NBR

    PE. 80. BW11 - PE ball valve, PE 100, SDR 11, Seating joints in NBR, O-Rings in NBR
    - PE. 80. BW11 - PE ball valve, PE 100, SDR 11, Seating joints in NBR, O-Rings in NBR
    List of part numbers


    - Pipe clamps

    Pipe clamps
    - Pipe clamps
    List of part numbers


    - Plate flange for welding - PN 10

    Plate flange for welding - PN 10
    - Plate flange for welding - PN 10
    List of part numbers


    - Plate flange for welding - PN 10 - Raised face

    Plate flange for welding - PN 10 - Raised face
    - Plate flange for welding - PN 10 - Raised face
    List of part numbers


    - Plate flange for welding - PN 10 - Thin

    Plate flange for welding - PN 10 - Thin
    - Plate flange for welding - PN 10 - Thin
    List of part numbers


    - Plate flange for welding - PN 10 - Thin - Raised face

    Plate flange for welding - PN 10 - Thin - Raised face
    - Plate flange for welding - PN 10 - Thin - Raised face
    List of part numbers


    - Plate flange for welding - PN 16

    Plate flange for welding - PN 16
    - Plate flange for welding - PN 16
    List of part numbers


    - Plate flange for welding - PN 16 - Raised face

    Plate flange for welding - PN 16 - Raised face
    - Plate flange for welding - PN 16 - Raised face
    List of part numbers


    - Plate flange for welding - PN 25

    Plate flange for welding - PN 25
    - Plate flange for welding - PN 25
    List of part numbers


    - Plate flange for welding - PN 25 - Raised face

    Plate flange for welding - PN 25 - Raised face
    - Plate flange for welding - PN 25 - Raised face
    List of part numbers


    - Plate flange for welding - PN 40

    Plate flange for welding - PN 40
    - Plate flange for welding - PN 40
    List of part numbers


    - Plate flange for welding - PN 40 - Raised face

    Plate flange for welding - PN 40 - Raised face
    - Plate flange for welding - PN 40 - Raised face
    List of part numbers


    - Plate flange for welding - PN 6

    Plate flange for welding - PN 6
    - Plate flange for welding - PN 6
    List of part numbers


    - Plate flange for welding - PN 6 - Raised face

    Plate flange for welding - PN 6 - Raised face
    - Plate flange for welding - PN 6 - Raised face
    List of part numbers


    - Plug for hydraulic angle transmission

    Plug for hydraulic angle transmission
    - Plug for hydraulic angle transmission
    List of part numbers


    - PMKD - Mounting Plate

    PMKD - Mounting Plate
    - PMKD - Mounting Plate
    List of part numbers


    - POM. 71.01. CP - Coupling air-fast, Material: POM

    POM. 71.01. CP - Coupling air-fast, Material: POM
    - POM. 71.01. CP - Coupling air-fast, Material: POM
    List of part numbers


    - POM. 71.01. CPMT - Male adaptor air-fast, Material: POM

    POM. 71.01. CPMT - Male adaptor air-fast, Material: POM
    - POM. 71.01. CPMT - Male adaptor air-fast, Material: POM
    List of part numbers


    - POM. 71.02. CP - Elbow air-fast, Material: POM

    POM. 71.02. CP - Elbow air-fast, Material: POM
    - POM. 71.02. CP - Elbow air-fast, Material: POM
    List of part numbers


    - POM. 71.02. CPMT - Male elbow air-fast, Material: POM

    POM. 71.02. CPMT - Male elbow air-fast, Material: POM
    - POM. 71.02. CPMT - Male elbow air-fast, Material: POM
    List of part numbers


    - POM. 71.05. CP - Tee air-fast, Material: POM

    POM. 71.05. CP - Tee air-fast, Material: POM
    - POM. 71.05. CP - Tee air-fast, Material: POM
    List of part numbers


    - POM. 71.06. CPMT - Asimetric tee air-fast, Material: POM

    POM. 71.06. CPMT - Asimetric tee air-fast, Material: POM
    - POM. 71.06. CPMT - Asimetric tee air-fast, Material: POM
    List of part numbers


    - POM. 71.07. CPMT - Male tee air-fast, Material: POM

    POM. 71.07. CPMT - Male tee air-fast, Material: POM
    - POM. 71.07. CPMT - Male tee air-fast, Material: POM
    List of part numbers


    - POM. 71.09. CP - Cross air-fast, Material: POM

    POM. 71.09. CP - Cross air-fast, Material: POM
    - POM. 71.09. CP - Cross air-fast, Material: POM
    List of part numbers


    - PP distance plates for ZIKM Pipe Clips - DSM

    PP distance plates for ZIKM Pipe Clips - DSM
    - PP distance plates for ZIKM Pipe Clips - DSM
    List of part numbers


    - PP Pipe Support Clip - ZIKM

    PP Pipe Support Clip - ZIKM
    - PP Pipe Support Clip - ZIKM
    List of part numbers


    - PP. 01. SBE - Spiral Barb Elbow

    PP. 01. SBE - Spiral Barb Elbow
    - PP. 01. SBE - Spiral Barb Elbow
    List of part numbers


    - PP. 03. SBT - Spiral Barb Tee

    PP. 03. SBT - Spiral Barb Tee
    - PP. 03. SBT - Spiral Barb Tee
    List of part numbers


    - PP. 05. SBA - Spiral Barb Adaptor

    PP. 05. SBA - Spiral Barb Adaptor
    - PP. 05. SBA - Spiral Barb Adaptor
    List of part numbers


    - PP. 05. SBC - Spiral Barb Coupling

    PP. 05. SBC - Spiral Barb Coupling
    - PP. 05. SBC - Spiral Barb Coupling
    List of part numbers


    - PP. 12. FLG - PP flange (backing ring)

    PP. 12. FLG - PP flange (backing ring)
    - PP. 12. FLG - PP flange (backing ring)
    List of part numbers


    - PP. 13. FLG - PP blind flange

    PP. 13. FLG - PP blind flange
    - PP. 13. FLG - PP blind flange
    List of part numbers


    - PP. 18. MT - Nipple, BSP male x male thread

    PP. 18. MT - Nipple, BSP male x male thread
    - PP. 18. MT - Nipple, BSP male x male thread
    List of part numbers


    - PP. 19. CAP - Plug, BSP male thread

    PP. 19. CAP - Plug, BSP male thread
    - PP. 19. CAP - Plug, BSP male thread
    List of part numbers


    - PP. 20. CL - PP closed pipe clip, Metric series

    PP. 20. CL - PP closed pipe clip, Metric series
    - PP. 20. CL - PP closed pipe clip, Metric series
    List of part numbers


    - PP. 20. CP - PP bridle clamp, Metric series

    PP. 20. CP - PP bridle clamp, Metric series
    - PP. 20. CP - PP bridle clamp, Metric series
    List of part numbers


    - PP. 20. OP - PP open pipe clip, Metric series

    PP. 20. OP - PP open pipe clip, Metric series
    - PP. 20. OP - PP open pipe clip, Metric series
    List of part numbers


    - PP. 26. Anti-frost - Valve box anti-frost plate

    PP. 26. Anti-frost - Valve box anti-frost plate
    - PP. 26. Anti-frost - Valve box anti-frost plate
    List of part numbers


    - PP. 26. Circular 5" - Round valve box, With clipped cover

    PP. 26. Circular 5" - Round valve box, With clipped cover
    - PP. 26. Circular 5" - Round valve box, With clipped cover
    List of part numbers


    - PP. 26. Circular 9" - Round valve box, With twistlock cover

    PP. 26. Circular 9" - Round valve box, With twistlock cover
    - PP. 26. Circular 9" - Round valve box, With twistlock cover
    List of part numbers


    - PP. 26. Circular Garden - Round valve box, With 3/4" hose valve

    PP. 26. Circular Garden - Round valve box, With 3/4" hose valve
    - PP. 26. Circular Garden - Round valve box, With 3/4" hose valve
    List of part numbers


    - PP. 26. Cover - Valve box cover

    PP. 26. Cover - Valve box cover
    - PP. 26. Cover - Valve box cover
    List of part numbers


    - PP. 26. Cover_Circular - Valve box cover

    PP. 26. Cover_Circular - Valve box cover
    - PP. 26. Cover_Circular - Valve box cover
    List of part numbers


    - PP. 26. Grid - Valve box grid

    PP. 26. Grid - Valve box grid
    - PP. 26. Grid - Valve box grid
    List of part numbers


    - PP. 26. Rectangular - Rectangular valve box, With screw cover

    PP. 26. Rectangular - Rectangular valve box, With screw cover
    - PP. 26. Rectangular - Rectangular valve box, With screw cover
    List of part numbers


    - PP. 26. Suplemento - Rectangular valve box extension

    PP. 26. Suplemento - Rectangular valve box extension
    - PP. 26. Suplemento - Rectangular valve box extension
    List of part numbers


    - PP. 32. MFTR - Reducing nipple, BSP male x female thread

    PP. 32. MFTR - Reducing nipple, BSP male x female thread
    - PP. 32. MFTR - Reducing nipple, BSP male x female thread
    List of part numbers


    - PP. 33. MTR - Reducing nipple, BSP male x male thread

    PP. 33. MTR - Reducing nipple, BSP male x male thread
    - PP. 33. MTR - Reducing nipple, BSP male x male thread
    List of part numbers


    - PP. 43. IRR - Tee for assembly

    PP. 43. IRR - Tee for assembly
    - PP. 43. IRR - Tee for assembly
    List of part numbers


    - PP. 52. IRR - Threaded adaptor

    PP. 52. IRR - Threaded adaptor
    - PP. 52. IRR - Threaded adaptor
    List of part numbers


    - PP. 53. CS - Clamp saddle

    PP. 53. CS - Clamp saddle
    - PP. 53. CS - Clamp saddle
    List of part numbers


    - PP. 54. CS - Reinforced clamp saddle

    PP. 54. CS - Reinforced clamp saddle
    - PP. 54. CS - Reinforced clamp saddle
    List of part numbers


    - PP. 62. FT5 - "PP" ball valve, PP body, BSP female thread, Seating joints in HDPE, O-Rings in EPDM

    PP. 62. FT5 - "PP" ball valve, PP body, BSP female thread, Seating joints in HDPE, O-Rings in EPDM
    - PP. 62. FT5 - "PP" ball valve, PP body, BSP female thread, Seating joints in HDPE, O-Rings in EPDM
    List of part numbers


    - PP. 63. CP5 - "PP" ball valve, PP body, Comp x Comp, Seating joints in HDPE, O-Rings in EPDM

    PP. 63. CP5 - "PP" ball valve, PP body, Comp x Comp, Seating joints in HDPE, O-Rings in EPDM
    - PP. 63. CP5 - "PP" ball valve, PP body, Comp x Comp, Seating joints in HDPE, O-Rings in EPDM
    List of part numbers


    - PP. 63. CPFT5 - "PP" ball valve, PP body, Comp x BSP female thread, Seating joints in HDPE, O-Rings in EPDM

    PP. 63. CPFT5 - "PP" ball valve, PP body, Comp x BSP female thread, Seating joints in HDPE, O-Rings in EPDM
    - PP. 63. CPFT5 - "PP" ball valve, PP body, Comp x BSP female thread, Seating joints in HDPE, O-Rings in EPDM
    List of part numbers


    - PP. 96. SP - Hose plug

    PP. 96. SP - Hose plug
    - PP. 96. SP - Hose plug
    List of part numbers


    - PP. 97. FTSP - Hose coupling, BSP female thread

    PP. 97. FTSP - Hose coupling, BSP female thread
    - PP. 97. FTSP - Hose coupling, BSP female thread
    List of part numbers


    - PP. 98. MTSP - Hose coupling, BSP male thread

    PP. 98. MTSP - Hose coupling, BSP male thread
    - PP. 98. MTSP - Hose coupling, BSP male thread
    List of part numbers


    - PP. 99. SP - Hose coupling

    PP. 99. SP - Hose coupling
    - PP. 99. SP - Hose coupling
    List of part numbers


    - PP-P. 01. CP - 90° Elbow, Comp x Comp

    PP-P. 01. CP - 90° Elbow, Comp x Comp
    - PP-P. 01. CP - 90° Elbow, Comp x Comp
    List of part numbers


    - PP-P. 01. CPFT - 90° Elbow, Comp x BSP Female Thread

    PP-P. 01. CPFT - 90° Elbow, Comp x BSP Female Thread
    - PP-P. 01. CPFT - 90° Elbow, Comp x BSP Female Thread
    List of part numbers


    - PP-P. 01. CPMT - 90° Elbow, Comp x BSP Male Thread

    PP-P. 01. CPMT - 90° Elbow, Comp x BSP Male Thread
    - PP-P. 01. CPMT - 90° Elbow, Comp x BSP Male Thread
    List of part numbers


    - PP-P. 01. CPW - 90° Elbow, Comp x BSP Female Thread - Wall

    PP-P. 01. CPW - 90° Elbow, Comp x BSP Female Thread - Wall
    - PP-P. 01. CPW - 90° Elbow, Comp x BSP Female Thread - Wall
    List of part numbers


    - PP-P. 01. CPWR - 90° Reinforced Elbow, Comp x BSP Female Thread - Wall

    PP-P. 01. CPWR - 90° Reinforced Elbow, Comp x BSP Female Thread - Wall
    - PP-P. 01. CPWR - 90° Reinforced Elbow, Comp x BSP Female Thread - Wall
    List of part numbers


    - PP-P. 03. CP - 90° Tee, Comp x Comp x Comp

    PP-P. 03. CP - 90° Tee, Comp x Comp x Comp
    - PP-P. 03. CP - 90° Tee, Comp x Comp x Comp
    List of part numbers


    - PP-P. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread

    PP-P. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread
    - PP-P. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread
    List of part numbers


    - PP-P. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread

    PP-P. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread
    - PP-P. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread
    List of part numbers


    - PP-P. 04. CPR - 90° Reducing Tee, Comp x Comp x Comp

    PP-P. 04. CPR - 90° Reducing Tee, Comp x Comp x Comp
    - PP-P. 04. CPR - 90° Reducing Tee, Comp x Comp x Comp
    List of part numbers


    - PP-P. 05. CP - Coupling, Comp x Comp

    PP-P. 05. CP - Coupling, Comp x Comp
    - PP-P. 05. CP - Coupling, Comp x Comp
    List of part numbers


    - PP-P. 05. CPFT - Adaptor, Comp x BSP female thread

    PP-P. 05. CPFT - Adaptor, Comp x BSP female thread
    - PP-P. 05. CPFT - Adaptor, Comp x BSP female thread
    List of part numbers


    - PP-P. 05. CPMT - Adaptor, Comp x BSP male thread

    PP-P. 05. CPMT - Adaptor, Comp x BSP male thread
    - PP-P. 05. CPMT - Adaptor, Comp x BSP male thread
    List of part numbers


    - PP-P. 05. UCF1 - Universal Fitting, Universal x Comp

    PP-P. 05. UCF1 - Universal Fitting, Universal x Comp
    - PP-P. 05. UCF1 - Universal Fitting, Universal x Comp
    List of part numbers


    - PP-P. 05. UCF2 - Universal Fitting, Universal x Universal

    PP-P. 05. UCF2 - Universal Fitting, Universal x Universal
    - PP-P. 05. UCF2 - Universal Fitting, Universal x Universal
    List of part numbers


    - PP-P. 06. CPR - Reducing coupling, Comp x Comp

    PP-P. 06. CPR - Reducing coupling, Comp x Comp
    - PP-P. 06. CPR - Reducing coupling, Comp x Comp
    List of part numbers


    - PP-P. 07. CP - Cap, Comp

    PP-P. 07. CP - Cap, Comp
    - PP-P. 07. CP - Cap, Comp
    List of part numbers


    - PP-P. 30. PART - Nut

    PP-P. 30. PART - Nut
    - PP-P. 30. PART - Nut
    List of part numbers


    - PP-P. 31. PART - Insert

    PP-P. 31. PART - Insert
    - PP-P. 31. PART - Insert
    List of part numbers


    - PP-P. 32. PART - Split Ring

    PP-P. 32. PART - Split Ring
    - PP-P. 32. PART - Split Ring
    List of part numbers


    - PP-P. 33. PART - O-Ring

    PP-P. 33. PART - O-Ring
    - PP-P. 33. PART - O-Ring
    List of part numbers


    - PP-P. 35. CP - Composite Pipe Adaptor

    PP-P. 35. CP - Composite Pipe Adaptor
    - PP-P. 35. CP - Composite Pipe Adaptor
    List of part numbers


    - PP-S. 01. CP - 90° Elbow, Comp x Comp

    PP-S. 01. CP - 90° Elbow, Comp x Comp
    - PP-S. 01. CP - 90° Elbow, Comp x Comp
    List of part numbers


    - PP-S. 01. CPFT - 90° Elbow, Comp x BSP Female Thread

    PP-S. 01. CPFT - 90° Elbow, Comp x BSP Female Thread
    - PP-S. 01. CPFT - 90° Elbow, Comp x BSP Female Thread
    List of part numbers


    - PP-S. 01. CPMT - 90° Elbow, Comp x BSP Male Thread

    PP-S. 01. CPMT - 90° Elbow, Comp x BSP Male Thread
    - PP-S. 01. CPMT - 90° Elbow, Comp x BSP Male Thread
    List of part numbers


    - PP-S. 03. CP - 90° Tee, Comp x Comp x Comp

    PP-S. 03. CP - 90° Tee, Comp x Comp x Comp
    - PP-S. 03. CP - 90° Tee, Comp x Comp x Comp
    List of part numbers


    - PP-S. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread

    PP-S. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread
    - PP-S. 03. CPFT - 90° Tee, Comp x Comp x BSP female thread
    List of part numbers


    - PP-S. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread

    PP-S. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread
    - PP-S. 03. CPMT - 90° Tee, Comp x Comp x BSP male thread
    List of part numbers


    - PP-S. 05. CP - Coupling, Comp x Comp

    PP-S. 05. CP - Coupling, Comp x Comp
    - PP-S. 05. CP - Coupling, Comp x Comp
    List of part numbers


    - PP-S. 05. CPFT - Adaptor, Comp x BSP female thread

    PP-S. 05. CPFT - Adaptor, Comp x BSP female thread
    - PP-S. 05. CPFT - Adaptor, Comp x BSP female thread
    List of part numbers


    - PP-S. 05. CPMT - Adaptor, Comp x BSP male thread

    PP-S. 05. CPMT - Adaptor, Comp x BSP male thread
    - PP-S. 05. CPMT - Adaptor, Comp x BSP male thread
    List of part numbers


    - PP-S. 06. CPR - Reducing coupling, Comp x Comp

    PP-S. 06. CPR - Reducing coupling, Comp x Comp
    - PP-S. 06. CPR - Reducing coupling, Comp x Comp
    List of part numbers


    - PP-S. 07. CP - Cap, Comp

    PP-S. 07. CP - Cap, Comp
    - PP-S. 07. CP - Cap, Comp
    List of part numbers


    - PP-S. 30. PART - Nut

    PP-S. 30. PART - Nut
    - PP-S. 30. PART - Nut
    List of part numbers


    - PP-S. 31. PART - Insert

    PP-S. 31. PART - Insert
    - PP-S. 31. PART - Insert
    List of part numbers


    - PP-S. 32. PART - Split Ring

    PP-S. 32. PART - Split Ring
    - PP-S. 32. PART - Split Ring
    List of part numbers


    - PP-S. 33. PART - O-Ring

    PP-S. 33. PART - O-Ring
    - PP-S. 33. PART - O-Ring
    List of part numbers


    - Profilanschluss parallel

    Profilanschluss parallel
    - Profilanschluss parallel
    List of part numbers


    - Reduced Barrel Nipple - parallel threaded - NRFV

    Reduced Barrel Nipple - parallel threaded - NRFV
    - Reduced Barrel Nipple - parallel threaded - NRFV
    List of part numbers


    - Reducer - d solvent welding spigot or socket d - RIV

    Reducer - d solvent welding spigot or socket d - RIV
    - Reducer - d solvent welding spigot or socket d - RIV
    List of part numbers


    - Reducer - R male parallel threaded, R - RFV

    Reducer - R male parallel threaded, R - RFV
    - Reducer - R male parallel threaded, R - RFV
    List of part numbers


    - Reducing Bush - d solvent welding spigot, d - DIV

    Reducing Bush - d solvent welding spigot, d - DIV
    - Reducing Bush - d solvent welding spigot, d - DIV
    List of part numbers


    - Reducing Bush - R male parallel threaded, R - DFV

    Reducing Bush - R male parallel threaded, R - DFV
    - Reducing Bush - R male parallel threaded, R - DFV
    List of part numbers


    - Reducing Bush - spigot for solvent welding d and reduced socket for solvent welding d - DLV

    Reducing Bush - spigot for solvent welding d and reduced socket for solvent welding d - DLV
    - Reducing Bush - spigot for solvent welding d and reduced socket for solvent welding d - DLV
    List of part numbers


    - Regalfuß

    Regalfuß
    - Regalfuß
    List of part numbers


    - Rotating union Serie TP 2000

    Rotating union Serie TP 2000
    - Rotating union Serie TP 2000
    List of part numbers


    - Rotating union Serie TP 6000 with flange

    Rotating union Serie TP 6000 with flange
    - Rotating union Serie TP 6000 with flange
    List of part numbers


    - Rotating union Serie TP 7000

    Rotating union Serie TP 7000
    - Rotating union Serie TP 7000
    List of part numbers


    - S.I.P

    S.I.P
    - S.I.P
    List of part numbers


    - Safety hose clamps Conductive, K Short screw with screwdriver slot

    Safety hose clamps Conductive, K Short screw with screwdriver slot
    - Safety hose clamps Conductive, K Short screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Conductive, L Long screw with screwdriver slot

    Safety hose clamps Conductive, L Long screw with screwdriver slot
    - Safety hose clamps Conductive, L Long screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Conductive, LF Long thumb screw

    Safety hose clamps Conductive, LF Long thumb screw
    - Safety hose clamps Conductive, LF Long thumb screw
    List of part numbers


    - Safety hose clamps Conductive, LH Long screw with hand cap

    Safety hose clamps Conductive, LH Long screw with hand cap
    - Safety hose clamps Conductive, LH Long screw with hand cap
    List of part numbers


    - Safety hose clamps Conductive, N Normal screw with screwdriver slot

    Safety hose clamps Conductive, N Normal screw with screwdriver slot
    - Safety hose clamps Conductive, N Normal screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Conductive, NF Normal thumb screw

    Safety hose clamps Conductive, NF Normal thumb screw
    - Safety hose clamps Conductive, NF Normal thumb screw
    List of part numbers


    - Safety hose clamps Conductive, NH Normal screw with hand cap

    Safety hose clamps Conductive, NH Normal screw with hand cap
    - Safety hose clamps Conductive, NH Normal screw with hand cap
    List of part numbers


    - Safety hose clamps Conductive, NS Normal screw with hexagon insert bit

    Safety hose clamps Conductive, NS Normal screw with hexagon insert bit
    - Safety hose clamps Conductive, NS Normal screw with hexagon insert bit
    List of part numbers


    - Safety hose clamps Stainless steel, K Short screw with screwdriver slot

    Safety hose clamps Stainless steel, K Short screw with screwdriver slot
    - Safety hose clamps Stainless steel, K Short screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Stainless steel, KS Short screw with hexagon insert bit

    Safety hose clamps Stainless steel, KS Short screw with hexagon insert bit
    - Safety hose clamps Stainless steel, KS Short screw with hexagon insert bit
    List of part numbers


    - Safety hose clamps Stainless steel, L Long screw with screwdriver slot

    Safety hose clamps Stainless steel, L Long screw with screwdriver slot
    - Safety hose clamps Stainless steel, L Long screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Stainless steel, LH Long screw with hand cap

    Safety hose clamps Stainless steel, LH Long screw with hand cap
    - Safety hose clamps Stainless steel, LH Long screw with hand cap
    List of part numbers


    - Safety hose clamps Stainless steel, N Normal screw with screwdriver slot

    Safety hose clamps Stainless steel, N Normal screw with screwdriver slot
    - Safety hose clamps Stainless steel, N Normal screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Stainless steel, NH Normal screw with hand cap

    Safety hose clamps Stainless steel, NH Normal screw with hand cap
    - Safety hose clamps Stainless steel, NH Normal screw with hand cap
    List of part numbers


    - Safety hose clamps Stainless steel, NS Normal screw with hexagon insert bit

    Safety hose clamps Stainless steel, NS Normal screw with hexagon insert bit
    - Safety hose clamps Stainless steel, NS Normal screw with hexagon insert bit
    List of part numbers


    - Safety hose clamps Standard, K Short screw with screwdriver slot

    Safety hose clamps Standard, K Short screw with screwdriver slot
    - Safety hose clamps Standard, K Short screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Standard, L Long screw with screwdriver slot

    Safety hose clamps Standard, L Long screw with screwdriver slot
    - Safety hose clamps Standard, L Long screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Standard, LF Long thumb screw

    Safety hose clamps Standard, LF Long thumb screw
    - Safety hose clamps Standard, LF Long thumb screw
    List of part numbers


    - Safety hose clamps Standard, LH Long screw with hand cap

    Safety hose clamps Standard, LH Long screw with hand cap
    - Safety hose clamps Standard, LH Long screw with hand cap
    List of part numbers


    - Safety hose clamps Standard, N Normal screw with screwdriver slot

    Safety hose clamps Standard, N Normal screw with screwdriver slot
    - Safety hose clamps Standard, N Normal screw with screwdriver slot
    List of part numbers


    - Safety hose clamps Standard, NF Normal thumb screw

    Safety hose clamps Standard, NF Normal thumb screw
    - Safety hose clamps Standard, NF Normal thumb screw
    List of part numbers


    - Safety hose clamps Standard, NH Normal screw with hand cap

    Safety hose clamps Standard, NH Normal screw with hand cap
    - Safety hose clamps Standard, NH Normal screw with hand cap
    List of part numbers


    - Safety hose clamps Standard, NS Normal screw with hexagon insert bit

    Safety hose clamps Standard, NS Normal screw with hexagon insert bit
    - Safety hose clamps Standard, NS Normal screw with hexagon insert bit
    List of part numbers


    - Serrated Stub - solvent welding socket, serrated faces for QPV/QRV and flat gaskets - QRV

    Serrated Stub - solvent welding socket, serrated faces for QPV/QRV and flat gaskets - QRV
    - Serrated Stub - solvent welding socket, serrated faces for QPV/QRV and flat gaskets - QRV
    List of part numbers


    - Socket Flange - Raised/serrated faces for flat gaskets - FDV

    Socket Flange - Raised/serrated faces for flat gaskets - FDV
    - Socket Flange - Raised/serrated faces for flat gaskets - FDV
    List of part numbers


    - Socket Flange - solvent welding socket - FLV

    Socket Flange - solvent welding socket - FLV
    - Socket Flange - solvent welding socket - FLV
    List of part numbers


    - Socket Union with sockets for solvent welding - EPDM or FPM gaskets - BIV

    Socket Union with sockets for solvent welding - EPDM or FPM gaskets - BIV
    - Socket Union with sockets for solvent welding - EPDM or FPM gaskets - BIV
    List of part numbers


    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male ISO

    SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male ISO
    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male ISO
    List of part numbers


    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male NPT

    SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male NPT
    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 1/4 in. Male NPT
    List of part numbers


    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 3/8 in. Male ISO Tapered Thread

    SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 3/8 in. Male ISO Tapered Thread
    - SS Swagelok Tube Fitting, Male Connector, 6 mm Tube OD x 3/8 in. Male ISO Tapered Thread
    List of part numbers


    - Stainless Steel Tee-Type Particulate Filter, 6 mm Swagelok Tube Fitting, 15 Micron Pore Size

    Stainless Steel Tee-Type Particulate Filter, 6 mm Swagelok Tube Fitting, 15 Micron Pore Size
    - Stainless Steel Tee-Type Particulate Filter, 6 mm Swagelok Tube Fitting, 15 Micron Pore Size
    List of part numbers


    - Steel pipe

    Steel pipe
    - Steel pipe
    List of part numbers


    - Threaded flange with neck - PN 10 and PN 16

    Threaded flange with neck - PN 10 and PN 16
    - Threaded flange with neck - PN 10 and PN 16
    List of part numbers


    - Threaded oval flange - PN 6

    Threaded oval flange - PN 6
    - Threaded oval flange - PN 6
    List of part numbers


    - Threaded Stub - socket parallel threaded for backing ring ODV and companion Stubs QFV, QGV, QPV, QRV - QFV

    Threaded Stub - socket parallel threaded for backing ring ODV and companion Stubs QFV, QGV, QPV, QRV - QFV
    - Threaded Stub - socket parallel threaded for backing ring ODV and companion Stubs QFV, QGV, QPV, QRV - QFV
    List of part numbers


    - TUBE COAXIAL 1/8+3/8 OD

    TUBE COAXIAL 1/8+3/8 OD
    - TUBE COAXIAL 1/8+3/8 OD
    List of part numbers


    - TUPYPRES®

    TUPYPRES®
    - TUPYPRES®
    List of part numbers


    - Union Bush for EFV - F/BIV

    Union Bush for EFV - F/BIV
    - Union Bush for EFV - F/BIV
    List of part numbers


    - Union Ends for EFV - Q/BIV

    Union Ends for EFV - Q/BIV
    - Union Ends for EFV - Q/BIV
    List of part numbers


    - Universalanschluss parallel

    Universalanschluss parallel
    - Universalanschluss parallel
    List of part numbers


    - Universalanschluss rechtwinklig

    Universalanschluss rechtwinklig
    - Universalanschluss rechtwinklig
    List of part numbers


    - UP. 01. FT - 90° Elbow, BSP female thread

    UP. 01. FT - 90° Elbow, BSP female thread
    - UP. 01. FT - 90° Elbow, BSP female thread
    List of part numbers


    - UP. 01. SF - 90° Elbow, Female solvent socket, Metric series

    UP. 01. SF - 90° Elbow, Female solvent socket, Metric series
    - UP. 01. SF - 90° Elbow, Female solvent socket, Metric series
    List of part numbers


    - UP. 01. SFT - 90° Elbow, Female solvent socket & BSP female thread, Metric series

    UP. 01. SFT - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    - UP. 01. SFT - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 01. SFTR - 90° Elbow, Female solvent socket & BSP female thread, Metric series

    UP. 01. SFTR - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    - UP. 01. SFTR - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 02. FT - 45° Elbow, BSP female thread

    UP. 02. FT - 45° Elbow, BSP female thread
    - UP. 02. FT - 45° Elbow, BSP female thread
    List of part numbers


    - UP. 02. SF - 45° Elbow, Female solvent socket, Metric series

    UP. 02. SF - 45° Elbow, Female solvent socket, Metric series
    - UP. 02. SF - 45° Elbow, Female solvent socket, Metric series
    List of part numbers


    - UP. 02. SFT - 45° Elbow, Female solvent socket & BSP female thread, Metric serie

    UP. 02. SFT - 45° Elbow, Female solvent socket & BSP female thread, Metric serie
    - UP. 02. SFT - 45° Elbow, Female solvent socket & BSP female thread, Metric serie
    List of part numbers


    - UP. 02. SFTR - 45° Reinforced elbow, Female solvent socket & BSP female thread, Metric serie

    UP. 02. SFTR - 45° Reinforced elbow, Female solvent socket & BSP female thread, Metric serie
    - UP. 02. SFTR - 45° Reinforced elbow, Female solvent socket & BSP female thread, Metric serie
    List of part numbers


    - UP. 03. FT - 90° Tee, BSP female thread

    UP. 03. FT - 90° Tee, BSP female thread
    - UP. 03. FT - 90° Tee, BSP female thread
    List of part numbers


    - UP. 03. RJ - Tee, 90° ,Rubber ring joint, Metric series

    UP. 03. RJ - Tee, 90° ,Rubber ring joint, Metric series
    - UP. 03. RJ - Tee, 90° ,Rubber ring joint, Metric series
    List of part numbers


    - UP. 03. RJSF - Tee, Rubber ring joint x female solvent socket, Metric series

    UP. 03. RJSF - Tee, Rubber ring joint x female solvent socket, Metric series
    - UP. 03. RJSF - Tee, Rubber ring joint x female solvent socket, Metric series
    List of part numbers


    - UP. 03. SF - 90° Tee, Female solvent socket, Metric series

    UP. 03. SF - 90° Tee, Female solvent socket, Metric series
    - UP. 03. SF - 90° Tee, Female solvent socket, Metric series
    List of part numbers


    - UP. 03. SFT - 90° Tee, Female solvent socket & BSP female thread, Metric series

    UP. 03. SFT - 90° Tee, Female solvent socket & BSP female thread, Metric series
    - UP. 03. SFT - 90° Tee, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 03. SFTR - 90° Reinforced tee, Female solvent socket & BSP female thread, Metric series

    UP. 03. SFTR - 90° Reinforced tee, Female solvent socket & BSP female thread, Metric series
    - UP. 03. SFTR - 90° Reinforced tee, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 04. RJG - Tee, 90° reducing and reinforced , Rubber ring joint, Metric series

    UP. 04. RJG - Tee, 90° reducing and reinforced , Rubber ring joint, Metric series
    - UP. 04. RJG - Tee, 90° reducing and reinforced , Rubber ring joint, Metric series
    List of part numbers


    - UP. 04. RJGFT - Tee, 90° reducing, Rubber ring joint x BSP female thread, Metric series

    UP. 04. RJGFT - Tee, 90° reducing, Rubber ring joint x BSP female thread, Metric series
    - UP. 04. RJGFT - Tee, 90° reducing, Rubber ring joint x BSP female thread, Metric series
    List of part numbers


    - UP. 04. SFG - 90° Reducing tee, Female solvent socket, Metric series

    UP. 04. SFG - 90° Reducing tee, Female solvent socket, Metric series
    - UP. 04. SFG - 90° Reducing tee, Female solvent socket, Metric series
    List of part numbers


    - UP. 04. SFTG - 90° Reducing tee, Female solvent socket & BSP female thread, Metric series

    UP. 04. SFTG - 90° Reducing tee, Female solvent socket & BSP female thread, Metric series
    - UP. 04. SFTG - 90° Reducing tee, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 05. FT - Threaded adaptor socket, BSP female thread

    UP. 05. FT - Threaded adaptor socket, BSP female thread
    - UP. 05. FT - Threaded adaptor socket, BSP female thread
    List of part numbers


    - UP. 05. RJ - Union socket, Rubber ring joint, Metric series

    UP. 05. RJ - Union socket, Rubber ring joint, Metric series
    - UP. 05. RJ - Union socket, Rubber ring joint, Metric series
    List of part numbers


    - UP. 05. SF - Socket, Female solvent socket, Metric series

    UP. 05. SF - Socket, Female solvent socket, Metric series
    - UP. 05. SF - Socket, Female solvent socket, Metric series
    List of part numbers


    - UP. 05. SFT - Adaptor Socket, Female solvent socket & BSP female thread, Metric series

    UP. 05. SFT - Adaptor Socket, Female solvent socket & BSP female thread, Metric series
    - UP. 05. SFT - Adaptor Socket, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 05. SFTR - Adaptor Socket reinforced, Female solvent socket & BSP female thread, Metric series

    UP. 05. SFTR - Adaptor Socket reinforced, Female solvent socket & BSP female thread, Metric series
    - UP. 05. SFTR - Adaptor Socket reinforced, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 06. SMF - Reducing bush, Male x female solvent socket, Metric series

    UP. 06. SMF - Reducing bush, Male x female solvent socket, Metric series
    - UP. 06. SMF - Reducing bush, Male x female solvent socket, Metric series
    List of part numbers


    - UP. 07. FT - Cap, BSP female thread

    UP. 07. FT - Cap, BSP female thread
    - UP. 07. FT - Cap, BSP female thread
    List of part numbers


    - UP. 07. SF - Cap, Female solvent socket, Metric series

    UP. 07. SF - Cap, Female solvent socket, Metric series
    - UP. 07. SF - Cap, Female solvent socket, Metric series
    List of part numbers


    - UP. 08. SF - 90° Bend, Female solvent socket, Metric serie

    UP. 08. SF - 90° Bend, Female solvent socket, Metric serie
    - UP. 08. SF - 90° Bend, Female solvent socket, Metric serie
    List of part numbers


    - UP. 09. RJS - Conical reducer, Rubber ring joint x female solvent socket, Metric series

    UP. 09. RJS - Conical reducer, Rubber ring joint x female solvent socket, Metric series
    - UP. 09. RJS - Conical reducer, Rubber ring joint x female solvent socket, Metric series
    List of part numbers


    - UP. 09. SMF - Conical reducer, Male x female solvent socket, Metric series

    UP. 09. SMF - Conical reducer, Male x female solvent socket, Metric series
    - UP. 09. SMF - Conical reducer, Male x female solvent socket, Metric series
    List of part numbers


    - UP. 10. SF - PVC-U flange adaptor (stub flange), Female solvent socket, Metric series

    UP. 10. SF - PVC-U flange adaptor (stub flange), Female solvent socket, Metric series
    - UP. 10. SF - PVC-U flange adaptor (stub flange), Female solvent socket, Metric series
    List of part numbers


    - UP. 11. FLG - PVC-U Flange

    UP. 11. FLG - PVC-U Flange
    - UP. 11. FLG - PVC-U Flange
    List of part numbers


    - UP. 15 .SFMT - Adaptor nipple, Female solvent socket & BSP male thread, Metric series

    UP. 15 .SFMT - Adaptor nipple, Female solvent socket & BSP male thread, Metric series
    - UP. 15 .SFMT - Adaptor nipple, Female solvent socket & BSP male thread, Metric series
    List of part numbers


    - UP. 16. SFMT - Adaptor nipple, Female solvent socket x BSP female thread, Metric series

    UP. 16. SFMT - Adaptor nipple, Female solvent socket x BSP female thread, Metric series
    - UP. 16. SFMT - Adaptor nipple, Female solvent socket x BSP female thread, Metric series
    List of part numbers


    - UP. 17. SFMT - Adaptor bush, Female solvent socket x BSP female thread, Metric series

    UP. 17. SFMT - Adaptor bush, Female solvent socket x BSP female thread, Metric series
    - UP. 17. SFMT - Adaptor bush, Female solvent socket x BSP female thread, Metric series
    List of part numbers


    - UP. 18. MT - Hexagon nipple, BSP male thread

    UP. 18. MT - Hexagon nipple, BSP male thread
    - UP. 18. MT - Hexagon nipple, BSP male thread
    List of part numbers


    - UP. 19. MT - Plug, BSP male thread

    UP. 19. MT - Plug, BSP male thread
    - UP. 19. MT - Plug, BSP male thread
    List of part numbers


    - UP. 21. MFT - Union bush, BSP male x female thread

    UP. 21. MFT - Union bush, BSP male x female thread
    - UP. 21. MFT - Union bush, BSP male x female thread
    List of part numbers


    - UP. 21. SFMT - Union bush, Female solvent socket x BSP male thread, Metric series

    UP. 21. SFMT - Union bush, Female solvent socket x BSP male thread, Metric series
    - UP. 21. SFMT - Union bush, Female solvent socket x BSP male thread, Metric series
    List of part numbers


    - UP. 22. FT - Union end, BSP female thread, Metric series

    UP. 22. FT - Union end, BSP female thread, Metric series
    - UP. 22. FT - Union end, BSP female thread, Metric series
    List of part numbers


    - UP. 22. MT - Union, BSP male thread

    UP. 22. MT - Union, BSP male thread
    - UP. 22. MT - Union, BSP male thread
    List of part numbers


    - UP. 22. SF - Union end, Female solvent socket, Metric series

    UP. 22. SF - Union end, Female solvent socket, Metric series
    - UP. 22. SF - Union end, Female solvent socket, Metric series
    List of part numbers


    - UP. 22. SM - Union, Male solvent socket, Metric series

    UP. 22. SM - Union, Male solvent socket, Metric series
    - UP. 22. SM - Union, Male solvent socket, Metric series
    List of part numbers


    - UP. 23. FT - Union nut, BSP female thread

    UP. 23. FT - Union nut, BSP female thread
    - UP. 23. FT - Union nut, BSP female thread
    List of part numbers


    - UP. 24. MT - Spigot connection, BSP male thread

    UP. 24. MT - Spigot connection, BSP male thread
    - UP. 24. MT - Spigot connection, BSP male thread
    List of part numbers


    - UP. 24. SF - Spigot connection, Solvent socket

    UP. 24. SF - Spigot connection, Solvent socket
    - UP. 24. SF - Spigot connection, Solvent socket
    List of part numbers


    - UP. 25. FLG - PVC-U flange adaptor (stub & backing ring), Female solvent socket, Metric series

    UP. 25. FLG - PVC-U flange adaptor (stub & backing ring), Female solvent socket, Metric series
    - UP. 25. FLG - PVC-U flange adaptor (stub & backing ring), Female solvent socket, Metric series
    List of part numbers


    - UP. 27. RJS - Adaptor socket, Rubber ring joint x male solvent socket, Metric series

    UP. 27. RJS - Adaptor socket, Rubber ring joint x male solvent socket, Metric series
    - UP. 27. RJS - Adaptor socket, Rubber ring joint x male solvent socket, Metric series
    List of part numbers


    - UP. 28. SF - Cross, Female solvent socket, Metric series

    UP. 28. SF - Cross, Female solvent socket, Metric series
    - UP. 28. SF - Cross, Female solvent socket, Metric series
    List of part numbers


    - UP. 29. SFG - 90° Reducing elbow, Female solvent socket, Metric series

    UP. 29. SFG - 90° Reducing elbow, Female solvent socket, Metric series
    - UP. 29. SFG - 90° Reducing elbow, Female solvent socket, Metric series
    List of part numbers


    - UP. 29. SMT - 90° Elbow, Female solvent socket & BSP female thread, Metric series

    UP. 29. SMT - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    - UP. 29. SMT - 90° Elbow, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 30. SFG- 45° Reducing elbow, Female and male solvent socket, Metric series

    UP. 30. SFG- 45° Reducing elbow, Female and male solvent socket, Metric series
    - UP. 30. SFG- 45° Reducing elbow, Female and male solvent socket, Metric series
    List of part numbers


    - UP. 31. SFT - Adaptor nipple, Female solvent socket & BSP female thread, Metric series

    UP. 31. SFT - Adaptor nipple, Female solvent socket & BSP female thread, Metric series
    - UP. 31. SFT - Adaptor nipple, Female solvent socket & BSP female thread, Metric series
    List of part numbers


    - UP. 32. MFT - Threaded reducer, BSP male x female thread

    UP. 32. MFT - Threaded reducer, BSP male x female thread
    - UP. 32. MFT - Threaded reducer, BSP male x female thread
    List of part numbers


    - UP. 33. MT - Threaded reducer, BSP male x male thread

    UP. 33. MT - Threaded reducer, BSP male x male thread
    - UP. 33. MT - Threaded reducer, BSP male x male thread
    List of part numbers


    - UP. 34. MFT - Short threaded reducer, BSP male x female thread

    UP. 34. MFT - Short threaded reducer, BSP male x female thread
    - UP. 34. MFT - Short threaded reducer, BSP male x female thread
    List of part numbers


    - UP. 35. SF - 45° Bend, Female solvent socket, Metric serie

    UP. 35. SF - 45° Bend, Female solvent socket, Metric serie
    - UP. 35. SF - 45° Bend, Female solvent socket, Metric serie
    List of part numbers


    - UP. 36. SF - 45° Tee, Female solvent socket, Metric series

    UP. 36. SF - 45° Tee, Female solvent socket, Metric series
    - UP. 36. SF - 45° Tee, Female solvent socket, Metric series
    List of part numbers


    - UP. 37. FLG - PVC-U blind flange